Sauermann DBM-VMG
Velocity Measurement Grid Kit for DBM 620 Air Flow Balometer
The Sauermann DBM-VMG Velocity Measurement Grid Kit is suited for use with the DBM 620 Air Flow Balometer and is designed for air velocity measurements on any type of ceiling vent or diffuser. For reliable measurements, the grid calculates the average air velocity from 24 points. The grid is attached to an articulated telescopic pole that can reach a length of 2.05 meters and swivel up to 90 degrees.
- Measuring Range: 0.2 to 10 m/s
- Accuracy: ±3% of measured value
- Designed for air velocity measurements on any type of large celling vent/diffuser
- Calculates average air velocity from 24 points to guarantee reliable measurements
- Attached to telescopic/articulated pole (2.05m maximum length/90° maximum articulation)
- Struts of 3 different lengths for correct positioning of grid on ceiling surface
- Transport case allows easy carriage of grid/accessories
- Measuring Range: 0.2 to 10 m/s
- Accuracy: ±3% of measured value ±0.04 m/s
- Resolution: 0.01 m/s up to 3 m/s
- Struts Length: 5cm/15cm/25cm
The Sauermann DBM-VMG Velocity Measurement Grid Kit is designed for air velocity measurements on any type of large ceiling vent or diffuser. Similar to the standard DBM 620 grid, this grid calculates the average air velocity from 24 points in order to guarantee reliable measurements.
The grid is attached to an articulated telescopic pole. This pole can be extended up to a height of 2.05 meters and can be articulated up to a 90 degree angle. The struts of 3 different lengths (5, 15, 25 centimeters) allow for correct positioning of the grid on the ceiling surface.
Brand | Sauermann |
---|---|
Condition | NEW |
- 1 - Velocity Measurement Grid
- 1 - Articulated Telescopic Pole
- 1 - Set of Positioning Struts (5cm, 15cm, 25cm)
- 2 - Silicone Tubes
- 1 - Transport Case