SCS 130046

Metal-In Static Shield Bag 4 in. x 6 in. 100 Count

130046
130046

SCS 130046

Metal-In Static Shield Bag 4 in. x 6 in. 100 Count

130046
130046
  • Dimensions: 4 in. x 6 in.
  • Metal-In Film Laminate 0.0032" thick (3.2 mil)
  • Printed with ESD Protective Symbol and Lot Code Information
Discontinued
  • Dimensions: 4 in. x 6 in.
  • Metal-In Film Laminate 0.0032" thick (3.2 mil)
  • Printed with ESD Protective Symbol and Lot Code Information
  • Protects ESD sensitive contents from electrostatic fields and electrostatic discharges (ESD)
  • <20 nJ Discharge Shielding Energy Limit Test per ANSI/ESD STM11.31
  • Meets ANSI/ESD S20.20 and ANSI/ESD S11.4 requirements for ESD shielding packaging inside and outside an ESD Protected Area (EPA)
  • >22lb Puncture Strength Average provides physical protection for contents
  • Rs 1 x 104to <1 x 1011 ohms per ANSI/ESD STM11.11, Packaging ANSI/ESD S541 and Static Control Bag ANSI/ESD S11.4 Level 3
  • Allows bag to be used throughout an ESD Protected Area and grounded when placed on a grounded surface or handled by a grounded operator
  • Meets the requirements of ANSI/ESD S541 for quality control purposes
  • Lead-free RoHS 2, REACH and Conflict Minerals Compliant

The SCS 130046 Metal-In Static Shield Bag 4 in. x 6 in. 100 Count is a transparent metal-in static shielding bag is designed to provide a static safe environment for ESD sensitive electronic devices. This model has an open top and is heat sealable. The 130046 is manufactured from a polyester, metal, polyethylene laminate. The polyester dielectric in concert with the metal layer provides discharge shielding. The exterior being static dissipative allows electrostatic charges to be removed when grounded.

More Information
BrandSCS
ConditionNEW
Vendor Alias130046
  • 100 - Metal-In Static Shield Bags 4 in. x 6 in.