Tektronix TAP4000
4 GHz Single-Ended Active Low Voltage Probe with TekVPI Probe Interface
TAP4000
TAP4000
Tektronix TAP4000
4 GHz Single-Ended Active Low Voltage Probe with TekVPI Probe Interface
TAP4000
TAP4000
- Bandwidth: ≥4 GHz
- Rise time: ≤115 ps
- Input capacitance: ≤0.8 pF
- Bandwidth: ≥4 GHz
- Rise time: ≤115 ps
- Input capacitance: ≤0.8 pF
- Input resistance: 40 kOhm
- Input dynamic range: -4 V to +4 V
- input offset range: -10 V to +10 VDC
- Maximum input voltage (nondestructive): +/-30 V (DC + peak AC)
- Propagation delay: 5.3 ns
- Excellent signal fidelity
- Versatile mechanical performance
- Small compact probe head for probing small geometry circuit elements
- DUT attachment accessories enable connection to SMDs as small as 0.5mm pitch
- Robust design for reliability
- Connects directly to oscilloscopes with TekVPI probe interface
- Provides automatic units scaling and readout on oscilloscope display
- Easy access to oscilloscope probe menu display for probe status diagnostic information and to control probe DC offset
- Remote GPIB/USB probe control through oscilloscope
Applications
- Verification, debug, and characterization of high-speed designs
- Signal integrity, jitter, and timing analysis
- Manufacturing engineering and test
- Signals with voltage swings up to 8 Vp-p
The Tektronix TAP4000 4 GHz Single-Ended Active Low Voltage Probe with TekVPI Probe Interface provides excellent high-speed electrical and mechanical performance required for today's digital system designs. With an ultralow input capacitance and unique interface, the TAP4000 provides truer signal reproduction and fidelity for high-frequency measurements.
Selecting the right probe for your application is key to attaining the best signal fidelity in your measurements. Specifically designed for use and direct connection to oscilloscopes with the TekVPI probe interface, the TAP4000 achieves high-speed signal acquisition and measurement fidelity by solving three traditional problems:
- Lower DUT loading effects with ≤0.8 pF input capacitance and 40 kOhm input resistance
- Versatile DUT connectivity for attaching to small SMDs
- Preserving instrument bandwidth at the probe tip for up to 3.5 GHz oscilloscopes
Country of Origin | United States |
---|---|
Brand | Tektronix |
Condition | NEW |
- 1 - Set of Two (2) Y-Lead Adapters and Three (3) 3 in. Ground Leads (196-3456-xx)
- 2 - Micro CKT Test Tips (206-0569-xx)
- 1 - Set of Five (5) Customizable Ground Leads (196-3482-xx)
- 1 - Color Band Kit with Five (5) Colored Pairs (016-1315-xx)
- 1 - Set of Ten (10) Pogo Pin Grounds (016-1772-10)
- 1 - Set of Ten (10) Square Pin Sockets (016-1773-10)
- 1 - Set of Ten (10) Push-in Probe Tips (131-5638-11)
- 1 - Set of Ten (10) Right-Angle Adapters (016-1774-xx)
- 1 - Set of Four (4) SureToe Adapters (131-6254-xx)
- 1 - Antistatic Wrist Strap (006-3415-xx)
- 1 - Nylon Carrying Case (016-1952-xx)
- 1 - Plastic Accessory Case (006-7164-xx)
- 1 - User Manual (071-1836-xx)