Tektronix TCP0020
50 MHz, 20 ARMS AC/DC Current Probe with TekVPI Interface
The Tektronix TCP0020 50 MHz, 20 ARMS AC/DC Current Probe with TekVPI Interface is an easy-to-use probe designed for use with a variety of oscilloscopes. It is specifically designed for direct connection to oscilloscopes with the TekVPI probe interface.
- Easy-to-use and accurate AC/DC current measurements
- Core jaw diameter of 5 mm (0.2 in.)
- Accurately measures current levels as low as 10 mA per division
- Easy-to-use and accurate AC/DC current measurements
- Core jaw diameter of 5 mm (0.2 in.)
- Accurately measures current levels as low as 10 mA per division
- High accuracy with typically less than 1% DC gain error
- Split-core construction allows easy circuit connection
- Low noise and DC drift
- Connects directly to oscilloscopes with TekVPI probe interface
- Provides automatic units scaling and readout on oscilloscope display
- One-button degauss and AutoZero control for ease of use
- Easy access to scope-displayed probe menu for probe setup control and operating status information
- Remote control capability through TekVPI oscilloscope
- Bandwidth: DC to ≥50 MHz
- Rise time: 20 ARMS
- Max peak pulse current: 100 A
- Maximum sensitivity: 10 mA (on oscilloscopes that support 1 mV/div setting)
- Max bare-wire voltage: 150 V CAT II (300 V CAT II insulated wire)
- DC accuracy: ±1% typical, ±3% warranted
- Max amp-secon product: 1000 A*μs
- Insertion impedance: 0.036 Ω at 1 MHz; 0.117 Ω at 10 MHz; 0.54 Ω at 50 MHz
- Signal delay: 17 ns
Applications
- Power supplies
- Semiconductor devices
- Electronic ballasts
- Industrial/consumer electronics
- Mobile communications
- Motor drives
- Transportation systems
The Tektronix TCP0020 50 MHz, 20 ARMS AC/DC Current Probe with TekVPI Interface is an easy-to-use probe designed for use with a variety of oscilloscopes. It is specifically designed for direct connection to oscilloscopes with the TekVPI probe interface.
The TCP0020 AC/DC current probe provide sufficient performance to support 50 MHz measurement system bandwidth and provides a maximum 20 ARMS measurement range. This probe also provides excellent accuracy to current levels as low as 10 mA, important for meeting today's challenging current measurement needs.
Country of Origin | China |
---|---|
Brand | Tektronix |
Condition | NEW |
Vendor Alias | TEK-TCP0020 |
- 1 - 50 MHz, 20 ARMS AC/DC Current Probe with TekVPI Interface (TCP0020)
- 1 - Probe Ground Lead, 6 in.
- 1 - Nylon Carrying Case
- 1 - AC Adapter
- 1 - User Manual