Tektronix TDP3500
3.5 GHz Low-Voltage Differential Active Probe with TekVPI Interface
Tektronix TDP3500
3.5 GHz Low-Voltage Differential Active Probe with TekVPI Interface
The Tektronix TDP3500 3.5 GHz Low-Voltage Differential Active Probe, TekVPI provides truer signal reproduction and fidelity for high-frequency measurements. With ultra-low input capacitance and versatile device-under-test connection capabilities, it provides excellent high-speed electrical and mechanical performance required for today's digital systems.
- Accurate measurements for serial/digital applications
- Excellent common mode rejection reduces measurement errors
- Accurate measurements for serial and digital applications
- Excellent common mode rejection reduces measurement errors in higher common environments
- Low capacitive and resistive loading maintains signal fidelity and reduces DC biasing interactions
- Compact probe head size for probing small geometry circuit elements
- DUT attachment accessories enable connection to fine-spaced SMDs
- Robust design for reliability
- Connects directly to oscilloscopes with TekVPI probe interface
- Provides automatic units scaling and readout on oscilloscopes display
- Easy access to probe comp box controls or oscilloscope probe menu display for probe status, setup control, and diagnostic information
- Direct connection to and powered from the TekVPI oscilloscope interface (Connects directly to TekVPI scopes without need of external power supplies)
- Single-button oscilloscope probe menu access
- Setup and control from probe comp box or oscilloscope user interface
- AutoZero - zeros out output offset
- Remote GPIB/USB probe control through oscilloscope
- Bandwidth (probe only): ≥3.5 GHz warranted
- Rise time (probe only): ≤140 ps
- Differential input capacitance: ≤0.3 pF
- Differential input resistance: 100 kΩ
- Differential input dynamic range: ±2 V
- Input offset range: ±1 V displayed
- DC + pk AC input voltage (non-destruct): ±15 V
- CMRR: >55 dB at 1 MHz and >25 dB at 1 GHz
Applications
- Design, validation, debugging, and characterization of common high-speed serial bus designs: I 2C, CAN/LIN, SPI, Serial ATA, Ethernet (GbE), USB 2.0, FIreWire (1394b)
- Signal integrity, jitter, and timing analysis
- Manufacturing, engineering, and test
The Tektronix TDP3500 3.5 GHz Low-Voltage Differential Active Probe with TekVPI Interface provides truer signal reproduction and fidelity for high-frequency measurements. With ultra-low input capacitance and versatile device-under-test connection capabilities, the TDP3500 provides excellent high-speed electrical and mechanical performance required for today's digital system designs.
A better measurement tool
Specifically designed for use and direct connection to oscilloscopes with the TekVPI probe interface, the TDP3500 differential probe achieves high-speed signal acquisition and measurement fidelity by solving three traditional problems:
- DUT loading effects - Are reduced by lower input capacitance and high input resistance
- DUT connectivity - A variety of accessories exist for attaching to small SMDs, some come standard or recommended
- Maximizing of system (oscilloscope and probe) bandwidth - Probing solutions for all measurements for TekVPI interface oscilloscope models up to 4 GHz
Country of Origin | United States |
---|---|
Brand | Tektronix |
Condition | NEW |
- 1 - 3.5 GHz Low-Voltage Differential Active Probe with TekVPI Interface ( TDP3500)
- 1 - Nylon Carrying Pouch with Inserts
- 1 - Probe Tip Cover
- 1 - Antistatic Wrist Strap
- 1 - Plastic Accessory Box
- 4 - Square Pin Adapters
- 4 - Variable Spacing Tip Adapters
- 2 - Y-Lead Adapters
- 3 - Micro CKT Test Tips
- 2 - 3 in. Ground Leads
- 2 - Marker Band Sets (5 Colors)
- 2 - Adapters, Resistors/Wires
- 10 - Wire Assemblies, 0.02 diameter
- 10 - Wire Assemblies, 0.008 diameter
- 10 - 10Ω Resistors with 0.02 diameter Wire
- 10 - 10Ω Resistors with 0.008 diameter Wire
- 10 - 20Ω Resistors with 0.02 diameter Wire
- 10 - 20Ω Resistors wiht 0.008 diameter Wire
- 1 - Certificate of Traceability