Tektronix TDP4000
4 GHz Differential Active Low Voltage Probe with TekVPI Probe Interface
TDP4000
TDP4000
Tektronix TDP4000
4 GHz Differential Active Low Voltage Probe with TekVPI Probe Interface
TDP4000
TDP4000
- Bandwidth: ≥4 GHz
- Rise time: ≤125 ps
- Differential input capacitance: ≤0.3 pF
- Bandwidth: ≥4 GHz
- Rise time: ≤125 ps
- Differential input capacitance: ≤0.3 pF
- Differential input resistance: 100 kOhm
- Maximum input voltage (non-destruct): +/-15 V (DC + pk AC)
- CMRR: >60 dB at 1 MHz, >25 dB at 1 GHz
- Propagation delay: 5.4 ns
- Common mode input range: +5 V to -4 V
- Input offset range: ±1 V displayed
- Differential input dynamic range: +/-2 V
- Accurate measurements for serial and digital applications
- Excellent common mode rejection reduces measurement errors in higher common environments
- Low capacitive and resistive loading maintains signal fidelity and reduces DC biasing interactions
- Versatile mechanical performance
- Compact probe head size for probing small geometry circuit elements
- DUT attachment accessories enable connection to fine-spaced SMDs
- Robust design for reliability
- Easy to use
- Connects directly to oscilloscopes with the TekVPI probe interface
- Provides automatic units scaling and readout on oscilloscopes display
- Easy access to probe comp box controls or oscilloscope probe menu display for probe status, setup control, and diagnostic information
- Direct connection to and powered from TekVPI oscilloscope interface
- Connects directly to TekVPI scopes without need for external power supply
- Single-button oscilloscope probe menu access
- Setup and control from probe comp box or oscilloscope user interface
- AutoZero zeros out output offset
- Remote GPIB/USB probe control through oscilloscope
Applications
- Design, validation, debugging, and characterization of common highspeed serial bus designs (I 2C, CAN/LIN, SPI, Serial ATA, Ethernet (GbE), USB 2.0, FIreWire (1394b))
- Signal integrity, jitter, and timing analysis
- Manufacturing, engineering, and test
The Tekronix TDP4000 4 GHz Differential Active Low Voltage Probe with TekVPI Probe Interface provides excellent highspeed electrical and mechanical performance required for today's digital system designs. With ultra-low input capacitance and versatile device-under-test connection capabilities, the TDP4000 provides truer signal reproduction and fidelity for high-frequency measurements.
Specifically designed for use and direct connection to oscilloscopes with the TekVPI probe interface, the TDP4000 achieves high-speed signal acquisition and measurement fidelity by solving three traditional problems:
- DUT loading effects are reduced by lower input capacitance and high input resistance
- DUT connectivity - A variety of accessories exist for attaching to small SMDs
- Maximizing of system (oscilloscope and probe) bandwidth - Probing solutions for all measurements for TekVPI interface oscilloscope models up to 4 GHz
Country of Origin | United States |
---|---|
Brand | Tektronix |
Condition | NEW |
- 1 - Accessory Kit (020-2883-xx) with One (1) Plastic Accessory Box (006-7164-xx), Four (4) Square Pin Adapters (016-1884-xx), Four (4) Variable Spacing Tip Adapters (016-1885-xx), Two (2) Y-Lead Adapters (196-3434-xx), Three (3) Micro CKT Test Tips (206-0569-xx), Two (2) 3 in. Ground Leads (196-3469-xx), Five (5) Pairs of Colored Marker Bands (016-1315-xx)
- 1 - Accessory Kit (020-2505-xx) with Two (2) Adapters and Two (2) Resistors/Wires (016-1926-xx), Ten (10) Wire Assemblies with 0.02 Diameter (016-1930-xx), Ten (10) Wire Assemblies with 0.008 Diameter (016-1931-xx), Ten (10) 10Ohm Resistors with 0.02 Diameter Wire (016-1927-xx), Ten (10) 10Ohm Resistors with 0.008 Diameter Wires (016-1933-xx), Ten (10) 20Ohm Resistors with 0.02 Diameter Wires (016-1928-xx), Ten (10) 20Ohm Resistors with 0.008 Diameter Wires (016-1934-xx)
- 1 - Nylong Carrying Pouch with Inserts (016-1952-xx)
- 1 0 Certificate of Traceability
- 1 -Probe Tip Cover (200-4236-xx)
- 1 - Antistatic Wrist Strap (006-3415-xx)