Teledyne FLIR 73413-0102

A65sc Benchtop Test Kit, 640 x 512, 30 Hz

734130102
73413-0102
73413-0102

Teledyne FLIR 73413-0102

A65sc Benchtop Test Kit, 640 x 512, 30 Hz

734130102
73413-0102
73413-0102

The Teledyne FLIR 734130102 A65sc Benchtop Test Kit is the perfect choice for engineering and science labs where size constraints are critical for performance. The uncooled VOx detector offers longwave imaging with thousands of temperature measurement points across the target for more reliable and comprehensive results than with a thermocouple or spot pyrometer.

  • IR Resolution: 640 x 512 px
  • Image Frequency: 30 Hz
  • Temperature Range: -13 - 275°F/-40 - 1022°F
This product is available for shipping to the US, Canada, and Puerto Rico only.
$9,440.00
This item ships FREE
  • Instant non-contact measurements across 327,680 (640 x 512) thermal pixels helps eliminate guesswork of finding hot spots
  • With accuracy of ±5% and thermal sensitivity/NETD of <50 mK, A65sc offers spot-on detection of fine thermal variations
  • GigE Vision and GenICam compliance means A65sc is plug-and-play when used with IMAQ Vision or other software packages

Overview

  • Base mounting: 4 x M3 thread mounting holes (bottom)
  • Detector type: Focal plane array (FPA), uncooled VOX microbolometer
  • Housing material: Magnesium and aluminum
  • Minimum spot size: 100 micron
  • Research IR software included: Yes
  • Resolution: 640 x 512
  • Time vs temperature plotting: Yes

Connections and Communications

  • Digital I/O connector type: 12-pole M12 connector (shared with Digital Synchronization and External power)
  • Digital I/O isolation voltage: 500 VRMS
  • Digital I/O supply voltage: 2 - 40 VDC, max 200 mA
  • Digital input purpose: General purpose
  • Digital inputs: 1x opto-isolated, "0" <1.2 VDC, "1" = 2-25 VDC
  • Digital output purpose: General purpose output to ext. device (programmatically set)
  • Digital outputs: 1x opto-isolated, 2 - 40 VDC, max 185 mA
  • Digital synchronization connector type: 12-pole M12 connector (shared with Digital I/O and External power)
  • Ethernet: Control and image
  • Ethernet communication: GigE Vision ver. 1.2 Client API GenICam compliant
  • Ethernet connector type: RJ-45
  • Ethernet image streaming: 8-bit monochrome @ 60 Hz Signal linear/ DDE Automatic/ Manual Flip H&V 14-bit 320 x 256 pixels @ 60 Hz Signal linear/ DDE Temperature linear GigE Vision and GenICam compatible
  • Ethernet power: Power over Ethernet, PoE IEEE 802.3af class 0 Power
  • Ethernet protocols: TCP, UDP, ICMP, IGMP, DHCP, GigEVision
  • Ethernet standard: IEEE 802.3
  • Ethernet type: Gigabit Ethernet
  • Synchronization in: 1x, non-isolated
  • Synchronization in - purpose: Frame synchronization in to control camera
  • Synchronization in - type: LVC Buffer @3.3V, "0" <0.8 V, "1" >2.0 V
  • Synchronization out: 1x, non-isolated
  • Synchronization out - purpose: Frame sync out to control another Ax5 camera
  • Synchronization out - type: LVC Buffer @ 3.3V, "0"=24 MA max, "1"= -24 mA max.

Environmental

  • Atmospheric transmission correction: Automatic, based on inputs for distance, atmospheric temperature and relative humidity
  • EMC: EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)
  • Emissivity correction: Variable from 0.5 to 1.0
  • Encapsulation: IP 40 (IEC 60529) with base support mounted
  • Humidity (operating and storage): IEC 60068-2-30/24 h 95% relative humidity 25°C to 40°C (77°F to 104°F)
  • Operating temperature range: -15°C to 50°C (5°F to 122°F); operating temperature range assumes that camera is mounted on base support (included) or similar type of heatsink
  • Shock: 25 g (IEC 60068-2-27)
  • Storage temperature range: -40°C to 70°C (-40°F to 158°F)
  • Tripod mounting: UNC 1/4"-20 (on three sides)
  • Vibration: 2 g (IEC 60068-2-6 & MIL-STD810G)

Imaging and Optical

  • Detector pitch: 17 µm
  • Detector time constant: Typical 12 ms
  • Digital data streaming to PC: Gigabit Ethernet
  • Field of view (FOV): 45° x 37°
  • f-number: 1.25
  • Focal length: 13 mm (0.5 in.)
  • Focus: Fixed
  • Image frequency: 30 Hz
  • IR resolution: 640 x 512 pixels
  • Spatial resolution (IFOV): 1.31 mrad
  • Spectral range: 7.5-13 µm
  • Thermal sensitivity/NETD: <0.05°C @ 30°C (86°F) / 50 mK

Measurement and Analysis

  • Accuracy: ±5°C (±9°F) or ±5% of reading
  • External optics and windows correction: Automatic, based on input of optics/window transmission and temperature
  • Measurement corrections: Global object parameters
  • Object temperature range: -25°C to 135°C (-13 to 275°F) / -40°C to 550°C (-40 to 1022°F)
  • Optics transmission correction: Automatic, based on signals from internal sensors
  • Reflected apparent temperature correction: Automatic, based on input of reflected temperature
  • Temperature range: -25°C to 135°C (-13F to 275°F) / -40°C to 550°C (-40°F to 1022°F)

Power

  • External power connector type: 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )
  • External power operation: 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max
  • Voltage: Allowed range 10-30 VDC

Visible Camera

  • Sensitivity: <0.05°C @ 30°C/50 mK

The Teledyne FLIR 734130102 A65sc Benchtop Test Kit, 640 x 512, 30 Hz is the perfect choice for engineering and science labs where size constraints are critical. The uncooled VOx detector offers longwave imaging with thousands of temperature measurement points across your target, for more reliable and comprehensive results than with a thermocouple or spot pyrometer. Together with the kit's lens choices and advanced analysis software, the 73413-0102 kit is the most dependable temperature measurement solution for industrial and research and development (R&D) labs.

More Information
BrandFLIR
Catalog73413-0102
ConditionNEW
UPC845188012915
Vendor Alias73413-0102
  • 1 - A65 Thermal Camera, 640 x 512, 30 Hz
  • 1 - Manual Focus 45°
  • 1 - ResearchIR Software
  • 1 - Camera Tripod Adapter
  • 1 - PoE Injector