• Start collecting and sharing meaningful data with limited ramp-up time and simple connections
• Employ Teledyne FLIR Research Studio's simple Connect➞View➞Record➞Analyze workflow to obtain and analyze thermal results quickly
• Work in preferred operating system and share data globally with colleagues in their preferred language(s)
• Get accurate thermal data on entire device and individual subcomponents
• Obtain correct thermal measurements with crisp remote, automatic, and manual focusing
• Multiple lens options ensure maximum number of pixels on test articles
• Accurately measure temperatures on small objects without need to switch lenses using included one-touch enabled Teledyne FLIR Macro Mode
• Get up and running faster with simple yet robust connections
• Ensure camera connections are correct and secure with M-style, positive lock connectors
• Eliminate need for additional cables using standard Power over Ethernet (PoE)
• Control camera parameters and recording through digital I/O

Overview

• Detector type: Uncooled microbolometer
• Dynamic range: 16-bit
• Macro mode: Included
• Pixel pitch: 17 µm
• Standard temperature range: -20°C to 120°C (-4°F to 248°F); 0°C to 650°C (32°F to 1202°F); 300°C to 1500°C (572°F to 2732°F)

Connections and Communications

• Command and control: Gigabit Ethernet (RTSP, GigE Vision)
• Digital I/O connector type: M12 Male 12-pin A-coded (shared with ext. power)
• Digital inputs: 2x opto-isolated, Vin (low) = 0-1.5 V, Vin (high) = 3-25V
• Digital outputs: 3x opto-isolated, 0-48 VDC, max. 350 mA (derated to 200 mA at 60°C). Solid-state opto relay, 1x dedicated as fault output (NC)
• Ethernet communication: GigE Vision ver. 1.2, Client API GenICam compliant, TCP/IP socket-based (Teledyne FLIR proprietary)
• Ethernet connector type: M12 8-pin X-coded, female
• Ethernet image streaming: Yes
• Ethernet power: Power over Ethernet, PoE IEEE 802.3af class 3
• WiFi: Connector: Female RP-SMA Standard: IEEE802.11a/b/g/n Connections: Peer to peer (ad hoc) or infrastructure (network)

Environmental

• Encapsulation: IEC 60529, IP 54, IP66 with accessory
• Mounting: UNC 1/4" mounting: -20 on 2 sides 4x M4 on 4 sides
• Operating temperature: -20°C to 50°C (-4°F to 122°F): -20°C to 40°C (-4°f to 104°F) (in free air); 40°C to 50°C (104°F to 122°F) (mounted on cooling plate accessory); Maximum camera case temperature: 65°C (149°F)
• Shock: IEC 60068-2-27, 25 g
• Storage temperature range: IEC 68-2-1 and IEC 68-2-2, -40°C to 70°C (-40°F to 158°F) for 16 hours
• Vibration: IEC 60068-2-6, 0.15 mm at 10-58 Hz and 2 g at 58-500 Hz, sinusoidal IEC 61373 Cat 1 (Railway)

Imaging and Optical

• Available lenses: 6°, 14°, 42°
• Detector pitch: 17 µm
• Digital data streaming to PC: Gigabit Ethernet (RTSP, GigE Vision) or Wi-Fi stream to workstation running included Research Studio Software
• Field of view (FOV): 24° x 18°
• Focus: One-shot contrast, motorized, manual
• Frame rate: 30 Hz
• Image modes: MSX, Picture-in-picture, blending, and fusion
• IR resolution: 320 x 240
• Lens: 24°, 2.0x Macro
• Lens identification: Automatic
• Minimum focus distance: 2.0x Macro: 18 mm (0.71 in) 24°: 0.15 m (0.49 ft) 24° with Macro Mode: 17 mm (0.67 in) 42°: 0.15 m (0.49 ft) 14°: 1.0 m (3.28 ft) 6°: 5.0 m (16.4 ft)
• MSX image enhancement: Yes, with optional visual camera
• Spectral range: 7.5 - 14.0 µm
• Thermal sensitivity/NETD: Lens dependent: <30 mK to <50 mK
• Visible camera: 5 Megapixel

Measurement and Analysis

• Accuracy: ±2°C (±3.6°F) or ±2% of reading for ambient temperature 15°C to 35°C (59°F to 95°F), object temperature above 0°C (32°F)

Other

• Power cable configuration: Power over Ethernet or External

Power

• External voltage: 18-56 VDC, 8 W max
• Power: 24/48 V DC 8 W max
• Power connection: M12 Male 12-pin A-coded (shared with Digital I/O)