• Quickly reveal thermal characteristics to eliminate guesswork and reduce product development time
• Reveal unknown thermal anomalies faster with quality infrared imagery
• Easily differentiate between features and components with built-in visible camera
• Enhance understanding of infrared image data using Teledyne FLIR MSX
• Start testing sooner with limited ramp-up time and simple non-proprietary industry standard interfaces
• Stream full radiometric image data using standard Gigabit Ethernet or Wi-Fi connections
• Perform qualitative and quantitative thermal analysis with included Teledyne FLIR Research Studio software
• Quickly view, record, analyze and share important thermal data across multiple platforms and languages
• Compare and examine thermal data simultaneously from multiple connected cameras and recorded data files
• Meet demands of multiple application environments and installations
• Ensure operation in tough environments thanks to rugged M-style connectors and standard IP66 protection
• Easily install this compact camera in any location, with multiple mounting options
• Eliminate need for multiple cables using Power over Ethernet and included Wi-Fi connectivity
• Transition from design and testing in labs to process control in production using non-proprietary GigE Vision and GenICam protocols, as well as SDKs

Overview

• Detector type: Uncooled microbolometer
• Dynamic range: 16-bit
• Macro mode: No
• Standard temperature range: -20°C to 175°C (-4°F to 347°F); 175°C to 1000°C (347°F to 1832°F)

Connections and Communications

• Command and control: Gigabit Ethernet (RTSP, GigE Vision), Wi-Fi
• Digital I/O connector type: M12 Male 12-pin A-coded (shared with external power)
• Digital I/O isolation voltage: 500 VRMS
• Digital inputs: 2x opto-isolated, Vin (low) = 0 to 1.5 V, Vin (high) = 3 to 25 V
• Digital outputs: 3x opto-isolated, 0 to 48 V DC, max. 350 mA (derated to 200 mA at 60°C); solid-state opto relay, 1x dedicated as fault output (NC)
• Ethernet communication: GigE Vision ver. 1.2, Client API GenICam compliant, TCP/IP socket-based (Teledyne FLIR proprietary)
• Ethernet connector type: M12 8-pin X-coded, female
• Ethernet image streaming: Yes
• Ethernet power: Power over Ethernet, PoE IEEE 802.3af class 3
• WiFi: Yes, Female RP-SMA connector; Peer to peer (ad hoc) or Infrastructure (network)

Environmental

• Encapsulation: IEC 60529 and IP66
• Mounting: 1/4-20 UNC depth 7 mm + Ø5 depth 2.7 mm
• Operating temperature: -20°C to 50°C (-4°F to 113°F), with included cooling plate, Maximum camera case temperature: 65°C (149°F)
• Shock: IEC 60068-2-27, 25 g
• Storage temperature range: IEC 68-2-1 and IEC 68-2-2, -40°C to 70°C (-40°F to 158°F) for 16 hours
• Vibration: IEC 60068-2-6, 0.15 mm at 10 Hz to 58 Hz and 2 g at 58 Hz to 500 Hz, Sinusoidal IEC 61373 Cat 1 (Railway)

Imaging and Optical

• Available lenses: Fixed lens only
• Detector pitch: 12 µm
• Digital data streaming to PC: Via workstation running included Research Studio Software
• Focus: Adjustable with included focus tool
• Frame rate: 30 Hz
• Image modes: Thermal, visual, MSX, FSX
• IR resolution: 640 x 480
• Lens: 95° fixed
• Lens identification: None
• Minimum focus distance: 0.1 m
• MSX image enhancement: Yes
• Spectral range: 7.5 - 14.0 µm
• Thermal sensitivity/NETD: <60 mK
• Visible camera: Included, 1280 x 960 resolution

Measurement and Analysis

• Accuracy: ±2°C (±3.6°F) or ±2% of reading, for ambient temperature 15°C to 35°C (59°F to 95°F) and object temperature above 0°C (32°F)

Other

• Power cable configuration: Power over Ethernet or External

Power

• External voltage: 24/48 V DC, 8 W max
• Power connection: M12 Male 12-pin A-coded (shared with Digital I/O)