Teledyne FLIR CM78-PV
True-RMS Solar Clamp Meter with Built-In Infrared Thermometer and METERLiNK Connectivity, CAT III 1500V
CM78PV
CM78-PV
Teledyne FLIR CM78-PV
True-RMS Solar Clamp Meter with Built-In Infrared Thermometer and METERLiNK Connectivity, CAT III 1500V
CM78PV
CM78-PV
The Teledyne FLIR CM78-PV True-RMS Solar Clamp Meter allows users to measure solar string DC performance along with locating and identifying overheating components with the built-in non-contact infrared thermometer and laser pointer. This meter supports wireless METERLiNK connectivity for quick data collection and sharing.
- Voltage Range: 1000VAC, 1500VDC
- Current Range: 1000AAC/DC
- Jaw Opening: 1.7 in.
- Category Rating: CAT IV 600V, CAT III 1500V
- Measures solar string DC power and performance up to 1500 kVA at CAT III 1500V rating
- Safely locates and identifies overheating components with non-contact IR thermometer and laser pointer
- Performs accurate measurements with TRMS readings, VFD mode, and low impedance (LoZ) mode
- Includes CAT III 1500V double-molded test leads and CAT III 1500V MC4 PV plugs
- Supports wireless METERLiNK connectivity for quick data collection and sharing
Applications
- Verify performance and safety of installed solar systems
- Monitor and maintain large-scale solar power plants
- Ensure quality of solar panels during production
Specifications
Electrical Measurement
- Voltage Range: 1000VAC, 1500VDC
- VFD Range: 1000VAC
- LoZ Range: 1000VAC, 1500VDC
- Current Range: 1000AAC/DC
- Inrush Current Range: 1000AAC
- Frequency Counter: 60 kHz
- Resistance Range: 60 KΩ
- Continuity Check: < 50Ω (beeper ON), > 150Ω (beeper OFF)
- Diode Test: 3V
- Capacitance Range: 6000 uF
- Flex Current Range: 3000AAC
- PV Range: 1500VDC
- PV Power Range: 1500 kVADC
- Measuring Rate: 3 samples per second
Power
- Battery: 6x AAA alkaline batteries
- Battery Life: ~50 hours
General
- Display Count: 6000
- Jaw Opening: 1.7 in. (42 mm)
- Category Rating: CAT IV 600V, CAT III 1500V
Certifications and Standards
- Certifications: ETL, CE, FCC, FDA, RCM
- Safety Standards: IEC 61010-1 CAT IV 600V, CAT III 1500V
- EMC Standards: EN61326-1, EN61326-2, EN300328, EN301489-1, EN301489-17, EN62478, FCC PART 15B/15C
The Teledyne FLIR CM78-PV True-RMS Solar Clamp Meter allows users to measure solar string DC power and performance up to 1500 kVA at a CAT III 1500V rating. With the built-in non-contact infrared thermometer and laser pointer, users can safely locate and identify overheating components. Users can also perform accurate measurement with TRMS readings, VFD mode, and low impedance (LoZ) mode. Included with the CM78-PV are both CAT III 1500V double-molded tested leads and CAT III 1500V MC4 PV plug test leads. This meter supports wireless METERLiNK connectivity for quick data collection and sharing.
With the CM78-PV, users can easily verify the performance and safety of installed solar systems. Large-scale solar power plants can be monitored and maintained while the quality of solar panels during production can be ensured.
| Brand | FLIR |
|---|---|
| Condition | NEW |
- 1 - True-RMS Solar Clamp Meter (CM78-PV)
- 1 - Solar Photovoltaic Test Lead Set with Banana Plug and MC4 Connector, 60 in. Lead, CAT III 1500V (TA89)
- 1 - Solar Photovoltaic Test Lead Set with Banana Plug and Dual Male/Female MC4 Connector, 60 in. Lead, CAT III 1500V (TA90)
- 1 - Rugged Carrying Pouch with Shoulder Strap (TA91)
- 6 - AAA (LR03) Batteries
- 1 - User Manual
Customers Also Bought
