Teledyne LeCroy AP031
700 V, 25 MHz High-Voltage Differential Probe
The Teledyne LeCroy AP031 is a High-Voltage Differential Probe designed for applications where electrical signals must be measured relative to a floating voltage that is different from the oscilloscope ground potential. This probe ensures safe oscilloscope operation and maintains high signal fidelity with good common mode rejection and dynamic range.
- 25 MHz High Voltage Differential Probe
- Attenuation ÷ 10 or ÷ 100
- Input Impedance 4 MOhms
- 25 MHz High Voltage Differential Probe
- Attenuation ÷ 10 or ÷ 100
- Input Impedance 4 MOhms
The Teledyne LeCroy AP031 is a fully differential active probe designed for applications where electrical signals must be measured relative to a floating voltage different to the oscilloscope ground potential.
This probe is specifically designed for situations where:
- The reference voltage may be several hundreds volts above or below ground.
- Measurements require the rejection of common mode signals.
- Ground loops and currents produce to excessive signal interference.
The use of the AP031 probe ensures safe operation of the oscilloscope and maintains high signal fidelity with good common mode rejection and dynamic range.
The probe is a fully differential active device. The differential capability allows measurements to be made between two points in a circuit without reference to ground. The two input signals are processed inside the probe and the resulting single-ended signal may be measured by any grounded oscilloscope. Because the differential voltage is calculated within the probe, with only the resultant difference signal being passed to the oscilloscope, a large dynamic range can be achieved with excellent rejection of common mode signals.
Country of Origin | Taiwan, Province of China |
---|---|
Brand | LeCroy |
Condition | NEW |
Replacement | T3HVD150070 |
- 1 - AP031 - 700 V, 25 MHz High-Voltage Differential Probe
- 2 - Safety Hooks
- 2 - 4 mm compatible (1 red, 1 black)