Teledyne LeCroy DL02-HCM
Common Mode Differential Probe with Standard Set of Leads and Tips, 250 MHz, 60V
Teledyne LeCroy DL02-HCM
Common Mode Differential Probe with Standard Set of Leads and Tips, 250 MHz, 60V
The Teledyne LeCroy DL02HCM Common Mode Differential Probe features a bandwidth of 250 MHz and is an ideal probe for up to 48 voltage power conversion. With 60 volts of common mode and 80 volts of differential input/dynamic range, this probe is well-suited for lower voltage GaN power conversion measurements.
- Ideal probe for up to 48V power conversion
- 250 Bandwidth
- 80V dynamic range
- 60V common mode
- High accuracy
- 0.5% gain accuracy
- Ideal probe for up to 48V power conversion
- 250 bandwidth
- 80V dynamic range
- 60V common mode
- High accuracy
- 0.5% gain accuracy
- Precision gain calibration
- Best LF flatness (0.1 dB)
- Low noise/high rejection
- Wide variety of tips
- ProBus active probe interface
The Teledyne LeCroy DL02-HCM Common Mode Differential Probe features a bandwidth of 250 megahertz and is the ideal probe for up to 48 voltage power conversion. With 60 volts of common mode and 80 volts of differential input/dynamic range, this probe is ideal for lower voltage GaN power conversion measurements. The 60 volts of common mode is well suited for handling any float of the battery and bulk or absorption voltage during charging. The 80 volts of differential input range provide margin for any overshoot.
The DL02-HCM probe is calibrated for high-precision measurements to within 0.5% at DC and 0.1 dB flatness from DC to 100 megahertz. This ensures high accuracy of top and base voltage level measurement of pulse-width modulated signals. The Precision Gain Calibration capability furthers measurement precision by improving the gain accuracy and removing small offset drifts from the measurement configuration.
The Common Mode Rejection Ratio (CMRR) is exceptional to very high frequencies. This provides the best measurement performance when measuring very fast slew rate (high dV/dt) PWM signals typical of GaN devices and systems. Exceptional CMRR, combined with low probe noise and high offset capability, makes the probes capable of measuring very small control signals floating on high common mode voltages.
The 60 volt Common Mode Differential Probes provide the perfect combination of high performance and flexibility for connecting to any device under test. An optional accessory kit and high temperature solder-in tip (not included) are available for further connectivity options.
Brand | LeCroy |
---|---|
Condition | NEW |
- 1 - Common Mode Differential Probe (DL02-HCM)
- 1 - Browser Tip
- 1 - 5 in. Y-Lead Socket
- 1 - Ground Lead
- 6 - Single Pins
- 2 - Straight Pin Headers
- 1 - Storage Case
- 1 - Accessory Tray
- 1 - Certificate of Calibration