Teledyne LeCroy PP005A
10:1 500 MHz 10 MOhms Passive Probe
The Teledyne LeCroy PP005A is a high impedance Passive Probe with a range of probing accessories. This micro-fine tip is spring-loaded, reducing the chance of "skipping" the circuit, once contact is established. Mechanical pressure is therefore reduced and probe life is enhanced.
- Bandwidth: 500 MHz
- Input resistance: 10 MΩ
- Input capacitance: 11 pF
- Maximum input voltage: 500 V
- Attenuation: 10:1
- Bandwidth (Probe Only): 500 MHz
- Input Resistance: 10 MΩ
- Input Capacitance: 11 pF
- Maximum Input Voltage: 500 V
- Attenuation: 10:1
- Coupling: AC 1 MΩ, DC 1MΩ, GND
- Diameter: 5 mm
The Teledyne LeCroy PP005A is a high impedance passive probe with a range of probing accessories. The micro-fine tip of all PP005A probes is spring-loaded, reducing the chance of "skipping" the circuit once contact is established. Mechanical pressure is therefore reduced and probe life is enhanced. The micro-fine tip contributes to contact stability, in addition to making it easier to reach tightly placed circuitry.
Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400V, some as high as 600V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.
Country of Origin | Germany |
---|---|
Brand | LeCroy |
Condition | NEW |
- 1 - 10:1 500 MHz 10 MOhms Passive Probe (PP005A)
- 1- Trimming Tool
- 1- Sprung Hook (Black)
- 1- IC Insulating Tip (Black)
- 1- Tip Protector
- 1- Ground Lead (11 cm)
- 1- Ground Lead Short on Probe Tip
- 1- BNC Adapter
- 1- Probe Tip
- 1- Spring Contact Tip (0.8)
- 1- Spring Contact Tip (0.38)
- 1- Instruction Manual