Teledyne LeCroy T3PM1006

AC/DC Single-Phase Digital Power Meter, 6 kHz, 100 to 240 VAC

T3PM1006
T3PM1006

Teledyne LeCroy T3PM1006

AC/DC Single-Phase Digital Power Meter, 6 kHz, 100 to 240 VAC

T3PM1006
T3PM1006

The Teledyne LeCroy T3PM1006 is a Digital Power Meter for single-phase AC power measurements, with a bandwidth of DC, 45 Hz to 6 kHz. It features a 4 in. TFT-LCD screen with a five-digit measurement display. There are 19 power measurement parameters, integration measurement function, front/rear panel inputs, and various communication interfaces.

  • Voltage: 15V/30V/60V/150V/300V/600V
  • Current: 5 mA/10 mA/20 mA/50 mA/100 mA/200 mA/0.5 A/1 A/2 A, 5 A, 10 A, 20 A
$1,539.45 Price $1,555.00
This item ships FREE
  • Voltage input: Floating input through resistive voltage divider
  • Current input: Floating input through shunt
  • Voltage measurement range: 15 V, 30 V, 60 V, 150 V, 300 V, 600 V
  • Current measurement range: 5 mA, 10 mA, 20 mA, 50 mA, 100 mA, 200 mA, 0.5 A, 1 A, 2 A, 5 A, 10 A, 20 A
  • Input bandwidth: DC, 45 Hz to 6 kHz
  • Power source: AC 100 ~ 240 V; 50 - 60 Hz
  • Watt resolution: 1 mW
  • Current resolution: 0.1 μA
  • 4 in. Large TFT-LCD display provides clear visibility of all measurement results
  • Two numerical display modes along with waveform display of various parameters: General numeric display mode displays 2 main test items + 6 secondary test items; Simple numeric mode displays test values of 4 main test items
  • Front and rear input terminal offers flexibility in choosing measuring terminals
  • Standard interfaces: USB, LAN, RS-232C
  • Meets requirement for IEC 62301 Power Measurement
  • Current/Voltage measurements reach CF = 3 for distorted wave and CF = 6 for half range
  • W-h Power vs Time/A–h Current vs Time Integration
  • Total harmonic distortion measurements

The Teledyne LeCroy T3PM1006 is a Digital Power Meter for single-phase (1P/2W) AC power measurements, with a test bandwidth of DC, 45 Hz to 6 kHz. The T3PM1006 features a 4 in. TFT-LCD screen with a five-digit measurement display. It offers 19 power measurement parameters to choose from, integration measurement function, front/rear panel input terminals, and various communication interfaces to help users make convenient and accurate power measurements.

The rated direct input voltage of T3PM1006 is 600 V and the input current is 20 A. The minimum current level is 5 mA (resolution up to 0.1 μA) and the power measurement resolution is 1 μW. The crest factor can reach 3 (half measurement range can reach 6 or 6 A), and the voltage/current/power measurement capability can reach ± 0.1% reading ± 0.1% level. Different measurement modes can be selected, offering up to 19 relevant parameters for power measurement. The T3PM1006 can be used to measure power consumption of general products, as well as the standby power consumption of low power devices that require greater range and accuracy.

In addition, the T3PM1006 offers PT/CT rate functions for large voltage/current measurement applications. High voltage measurements can be done using the VT rate setting, along with an external voltage potential transformer. Current measurements above 20 A can be obtained by connecting the current transformer (current output type) directly to the current input terminal on the rear panel, and then setting the appropriate CT ratio state in the ratio configuration menu.

The T3PM1006 provides RS-232C, USB device (virtual COM), and LAN communication interfaces for remote control applications. Its USB host supports screen capture, accessing data stored in internal memory, and firmware updates.

More Information
Vendor AliasT3PM1006
Country of OriginChina
BrandLeCroy
ConditionNEW
  • 1 - AC/DC Single-Phase Digital Power Meter, 6 kHz (T3PM1006)
  • 2 - Red Test Leads
  • 2 - Black Test Leads
  • 3 - Power Cords
  • 1 - Quick Start Guide