Teledyne LeCroy T3RC3000-HF
AC Rogowski Current Probe 2 mV/A, 3,000A, 3 Hz LF Bandwidth, 23MHz HF Bandwidth, 4m Cable, 200mm Coil
Teledyne LeCroy T3RC3000-HF
AC Rogowski Current Probe 2 mV/A, 3,000A, 3 Hz LF Bandwidth, 23MHz HF Bandwidth, 4m Cable, 200mm Coil
The Teledyne LeCroy T3RC3000-HF AC Rogowski Current Probe offers a bandwidth of 3 Hz to 23 MH and a maximum current measurement coverage up to 3000 Amps for maximum application coverage whilst being easy to use in difficult to reach parts of the circuit.
- Current measurement coverage up to 3000 Amps
- Voltage insulation up to 5 kV
- Connect to wall plugs or use with batteries
- Low loading of circuits under test
- Current measurement coverage up to 3000 Amps
- Voltage insulation up to 5 kV
- Connect to a wall plug or use with batteries
- Low loading of the circuit under test
- Wide coil operating temperature from -40 C to +125 C
- Use without modification to the DUT
The Teledyne LeCroy T3RC3000-HF Rogowski Current probe offers a bandwidth of 3 Hz to 23 MH and a maximum current measurement coverage up to 3000 Amps for maximum application coverage whilst being easy to use in difficult to reach parts of the circuit.
The flexibility of the probe sense coil means that measurements can often be made without modification to the circuit under test, giving more accurate results, whilst remaining isolated, with very low insertion load of only a few pH.
The inclusion of both battery power and wall plug operation means that the T3RC3000-HF current probe is as happy working out in the field as it is working on the bench.
The T3RC3000-HF is a general purpose Rogowski probe covering applications up to 3000 Amps. With extended high frequency coverage, 5 kV peak insulation and wide operating temperature range from -40C to +125C, makes it ideally suited to both general purpose as well as wide temperature environments.
The T3RC3000-HF probe is compatible with all of the Teledyne LeCroy Oscilloscopes. The probe has a simple connection requirement of a BNC input with 1 MOhm impedance. These probes will therefore work with the majority of oscilloscopes in the market. The probe can be made even more useful by using your Oscilloscope's Attenuation function to re-scale the Channel vertical range.
Country of Origin | United Kingdom |
---|---|
Brand | LeCroy |
Condition | NEW |
- 1 - AC Rogowski Coil Current Probe (T3RC3000-HF)
- 1 - Set of Batteries
- 1 - Power Line Adapter
- 1 - BNC Cable
- 1 - Storage Box