Teledyne LeCroy WS4KHD-EMB TD
*Internal Option* Embedded Upgrade, I2C, SPI, UART/RS232, for WaveSurfer 4000HD Units
Teledyne LeCroy WS4KHD-EMB TD
*Internal Option* Embedded Upgrade, I2C, SPI, UART/RS232, for WaveSurfer 4000HD Units
The Teledyne LeCroy WS4KHDEMBTD is an internal upgrade that adds I2C, SPI, UART-RS232 trigger and decode functionality to a single WaveSurfer 4000HD oscilloscope.
- Powerful and unique triggering capabilities for I2C, SPI, and UART-RS232
- Does not require clock trace to be displayed during decode
- Conditional DATA trigger definition
- Use analog or digital (MSO) inputs for acquisition and triggering
- EXT input may be used for clock signal
- Powerful and unique triggering capabilities for I2C, SPI, and UART-RS232
- Does not require clock trace to be displayed during decode
- Conditional DATA trigger definition
- Use analog or digital (MSO) inputs for acquisition and triggering
- EXT input may be used for clock signal
- Intuitive, color-coded decode overlays
- Interactive protocol table with zoom and pattern search
The Teledyne Lecroy WS4KHD-EMB TD Embedded bundle offers the capabilities for I2C, SPI, UART-RS232 Trigger and Decode, and is for use with the WaveSurfer 4000HD Oscilloscope series.
The I2C, SPI,and UART-RS232 triggers all have capabilities that set them apart. The I2C trigger has ability to trigger on long EEPROM read/writes, frame lengths, and presence of an ACK condition and R/W bit in a 7-bit address trigger. The SPI trigger does not require a chip select signal and supports nearly every SPI variation (SPI, SSPI, SIOP, SPI DDR). The UART-RS232 trigger 9-bit data bytes for situations in which a UART protocol is utilized for Address, Wakeup or other communication to another peripheral, preceding the normal serial data byte transmission. Both SPI and UART-RS232 support a message frame structure for support of proprietary USART and UART-based protocols in which bytes are grouped logically into message frames. For complete details, reference the product pages for the I2C, SPI, and UART-RS232 trigger products.
The trigger permits a conditional setup for the DATA condition. This is especially useful in situations where abnormal events should be monitored, such as when a CAN node broadcasts a low or high engine RPM or coolant pressure.
A transparent overlay with color-coding for specific portions of each protocol and the entire message frame makes it easy to understand the serial data information. Unlike other solutions, with protocol decode information away from the signal, our solution correlates the waveform and the protocol decode directly on the display. As the acquisition length is expanded or shortened, the decode overlay will adjust to show just the right amount of information.
Turn the oscilloscope into a protocol analyzer with a tabular display of decoded information. Customize the table to show only the data of interest and touch a message in the table to automatically zoom to it and display it on the screen. Export the table for offline analysis. Up to four different decoded signals of any type may be simultaneously displayed in the table.
Country of Origin | United States |
---|---|
Brand | LeCroy |
Condition | NEW |
- 1 - WS4KHD-EMB TD Embedded Bundle Upgrade