Telestream ECO8000-LTC
*Internal Option* Adds 4x LTC Channels to ECO8000 Units
ECO8000LTC
ECO8000-LTC
Telestream ECO8000-LTC
*Internal Option* Adds 4x LTC Channels to ECO8000 Units
ECO8000LTC
ECO8000-LTC
The Telestream ECO8000-LTC offers the option to add four LTC Channels to the ECO8000 ECO Automatic Changeover Units. These channel connections are pin-compatible with the Telestream SPG8000 or TG8000 Generator (not included) so that these signals can be connected with standard 15-pin D-SUB cables.
- Factory-installed option, must be purchased with ECO8000
- Adds 4x LTC channels to unit
- Signals can be connected with standard 15-pin D-SUB cables
- Addition compatible with ECO8000 ECO Automatic Changeover Units
- Factory-installed option, must be purchased with ECO8000
- Adds 4x LTC channels to unit
- Channel connections pin-compatible with SPG8000/TG8000 Generators (not included)
- Signals can be connected with standard 15-pin D-SUB cables
- Maximum Switched Voltage: ±5V
- Threshold Presets: 0.5 to 5Vpp in 0.5V steps, differential/single-ended
- Load Range: 600Ω to open circuit
- Crosstalk: Less than -60 dB for LTC signals
- Switching Interruption Duration: ~1 ms
The Telestream ECO8000-LTC offers the option to add four LTC Channels to the ECO8000 ECO Automatic Changeover Units. These channel connections are pin-compatible with the Telestream SPG8000 or TG8000 Generator (not included) so that these signals can be connected with standard 15-pin D-SUB cables. The same cable can be used to carry GPI connections, which allows for the SPG8000 to trigger a changeover on certain error conditions such as loss of genlock.
This option is factory-installed and must be purchased with the ECO8000 ECO Automatic Changeover Unit.
| Country of Origin | China |
|---|---|
| Brand | Telestream |
| Condition | NEW |
- 1 - Option for 4x LTC Channels (ECO8000-LTC)
