TREND Networks LTX5515-T-1310-2/10
Single-Mode Analog/Digital Fiber Optic Link Volt Transmitter, 1310 nm, 2 Gb/s Optical Transmission Rate
LTX5515T1310210
LTX5515-T-1310-2/10
TREND Networks LTX5515-T-1310-2/10
Single-Mode Analog/Digital Fiber Optic Link Volt Transmitter, 1310 nm, 2 Gb/s Optical Transmission Rate
LTX5515T1310210
LTX5515-T-1310-2/10
The TREND Networks LTX5515-T-1310-2/10 Single-Mode Analog/Digital Fiber Optic Link Volt Transmitter is designed to transmit analog and digital signals to a remote location via fiber optic cable. This unit digitizes the input signals at 100 Ms/s to 12-bit precision, transmits the results over a 2.0 Gb/s fiber link, and then reconstructs the signal at the far end.
- Analog Signal Bandwidth: DC to 25 MHz (-3 dB)
- Operating Wavelength: 1310 nm +/- 20 nm
- Two Voltage Input Ranges
- Transmits DC to 25 MHz with 0.1% Accuracy
- Transmits One Analog Channel with +/- 2 or +/-10 Volt Inputs
- 12 Bit Precision Analog Data
- Four Independent Digital Channels - DC to 24 MHz Switching Rates
- Two Impedance Settings
- Transmits without Conducting EMI
- Transmission of High Quality Video
Specifications:
- Analog Signal Bandwidth: DC to 25 MHz (-3 dB)
- Input Voltage Ranges: +/- 1V or +/- 5V (Selectable)
- Resolution: 12 Bits
- Transfer Accuracy: +/- 0.1% Full Scale, +/- 20 mV Offset
- Signal Latency: Approximately 300 nS (with One Meter of Fiber)
- A/D Sampling Rate: 100 Megasamples/s
- Input Impedance: 50 Ohms or 1 Megohm/20 pF (Selectable)
- Output Drive Capability: +/- 5V Open Circuit, +/- 2V into 50 Ohm Load
- Output Impedance: 50 Ohms
- Digital Inputs: TTL, LVTTL, CMOS Compatible
- Digital Outputs: LVTTL (0 - 3.3V)
- Digital Switching Rates: 0 - 24 MHz
- Digital Signal Edge Uncertainty: 0 - 10 nS
- Laser Wavelength: 1310 nm +/- 20 nm
- Optical Transmission Rate: 2.0 Gb/s
- Loss Budget: 15 dB max
- Optical Return Loss: > 15 dB
- Laser Safety Classification: Class I Safety per FDA/CDRH and IEC-825-1 Regulations
- Typical Trans. Distances: 250M - 50/125µ Fiber, 150M - 62.5/125µ Fiber
- Typical Trans. Distances (1310 nm): > 10 KM with 9/125 Micron Fiber
- Fiber Optic Connectors: ST Standard
- LED Annunciators Provided: Input Overload (TX), Optical Signal (RX)
- Power Supplies: Universal Wall Mount, US, UK, Continental Europe, Australian Plugs
- Power Requirements: 95-260VAC, 50-60 Hz, 16VA Max.
- Operating Temperature: 0° to 40°C
- Weight: 0.46 kg
The TREND Networks LTX5515-T-1310-2/10 Single-Mode Analog/Digital Fiber Optic Link Volt Transmitter is designed to transmit analog and digital signals to a remote location via fiber optic cable. This unit digitizes the input signals at 100 Ms/s to 12-bit precision, transmits the results over a 2.0 Gb/s fiber link, and then reconstructs the signal at the far end.
The primary applications are those situations in which the signal of interest has a high common mode voltage with respect to the measurement equipment. Applications include data acquisition for plasma physics experiments, signal transmission, or control of equipment at high voltage potentials, transmission of high quality video, and precise noise-free signal transmission in hostile EMI environments.
| Country of Origin | United States |
|---|---|
| Brand | TREND Networks |
| Condition | NEW |
| Vendor Alias | LTX5515-T-1310-2/10 |
- 1 - Fiber Optic Link Volt Transmitter (LTX5515-T-1310-2/10)
- 1 - 5-pin DIN DB25 Connector
- 1 - Power Supply with International Mains
