TREND Networks NaviTEK IE

Our Part No. NAVITEKIE

Mfr. Model NaviTEK IE

Catalog No. R151010

Skip to the end of the images gallery

Skip to the beginning of the images gallery

TREND Networks NaviTEK IE

Our Part No. NAVITEKIE

Mfr. Model NaviTEK IE

Catalog No. R151010

The Trend Networks R151010 NaviTEK IE Copper and Fiber Troubleshooter Tester is used for commissioning, preventative maintenance and troubleshooting of industrial Ethernet networks, as well as standard Ethernet IP networks. The R151010 identifies network nodes and configuration without requiring a PC and speciality software.

Pinpoint PROFINET cable faults (RJ45, M12, Fiber)
Prevent network failures with the health check
Easily configure nodes

$2,636.25 Price $2,775.00

This item ships FREE

Request a Quote

Key Features

NaviTEK IE copper and fiber troubleshooter for PROFINET industrial ethernet Networks
Display network configuration: IPv4 / IPv6 compatible
Wiremap for miswires, split pairs, opens and shorts
Distance to opens and shorts (TDR)
PoE/PoE+ detection and load test
Tone generator for cable tracing
Autotest button performs Ping and Traceroute test (network mode)
Hub blink for port identification
DHCP client
Switch speed detection: 10/100/1000 Mb/s
User-exchangeable RJ45 inserts
Support for up to 12 wiremap remotes
Backlit color screen
Autotest button performs suite of network tests: Internet connectivity (Ping, DNS, Gateway, Traceroute) and NetScan
Network Probe (NET TEST) provides detailed network information of each device
Port identification using EDP/CDP/LLDP protocols
VLAN detection
Traffic utilization bar graph
Generate test reports (PDF or CSV)
Send test reports from mobile devices using free TREND AnyWARE App
Logon using the 802.1x protocol
Optical interface with power level and pass/fail indication with supported SFP
Loopback mode for transmission testing on both copper and fiber interfaces
Touchscreen
Custom wiremap
M12 PROFINET cable testing
PROFINET fiber cable testing
Traffic light network health check
Device LED flash to locate devices faster
NETMAP compare: Identify changes in network
Configure node settings without need for laptops
List all network node details ie IP address, vendor details, software version etc.
Ability to reset device to factory defaults
Device alarm/error detection
Professional industrial Ethernet PDF reports
TREND Networks, formerly known as IDEAL Networks

Details

The TREND Networks (formerly IDEAL Networks) R151010 NaviTEK IE Copper and Fiber Troubleshooter is a tester for commissioning, preventative maintenance and troubleshooting of PROFINET Industrial Ethernet networks as well standard Ethernet IP networks.

Designed to simplify the process, the NaviTEK IE (R151010) identifies network nodes and configuration without requiring a PC and speciality software.

An easy to understand system health check pinpoints potential issues before they become network failures. Automatically discover cable, network or device configuration/faults with the touch of a button.

To prove the network has been commissioned successfully, NaviTEK IE (R151010) provides professional PDF reports that can be shared with colleagues and clients using the free TREND AnyWare™ mobile app.

Cable Testing

Pinpoint Cable Faults and Minimize Downtime

One of the main causes to network downtime is caused by cable faults. The NaviTEK IE (R151010) has a series of advanced wiremap tools for PROFINET and standard Ethernet IP network cabling.

Copper Cabling

Using the RJ45 or M12 interfaces the NaviTEK IE (R151010) offers a wiremap specifically designed for PROFINET Industrial Ethernet networks and Standard Ethernet networks.

Displays the correct wiring colors for the protocol used
Supported cable types - 4 twisted wires / 2 twisted pairs / 4 twisted pairs
Measures the cable length
Determine where and what the cable fault is including split pairs/opens/shorts/miswires

Copper Cabling

Fiber Cabling

Using the optional SFP module (not included) the NaviTEK IE (R151010) measures optical power and provides a good, satisfactory or poor indication of received power

Poor power levels can indicate bad SFPs, dirty connectors or damaged cabling
An optional 100Mb/s SFP media converter (not included) is available to access a 100Mb/s optical link

Fiber Cabling

Custom Wiremap

What makes NaviTEK IE a superior cable tester?

Accurate distance to fault using Time Domain Reflectometry (TDR)
Tests every wire in the data cable not every pair to help isolate issues that other testers cannot find
Supports standard and non-standard cabling as the wiremap can be customized to the user's specific cabling

Network Testing

Node Configuration

Correct network issues using the discovery and configuration tools

The NaviTEK IE (R151010) will discover the following list of faults:

-Incorrect device names

-Duplicate IP addresses

-Packet loss

If node configuration faults are found, easily correct them using the simple configure tool.

NETMAP Comparison Tool

Discover mis-configured devices that cause a network conflict

The NETMAP comparison tool can also perform a scan of the entire network to identify all active devices and save this for comparison to future NETMAPS. This enables easy identification of new or removed network devices, incorrectly configured devices or configuration changes, such as those caused by automatic firmware updates.

Record Key Network Errors

Find intermittent issues with the event log

The NaviTEK IE (R151010) will record key network errors for up to 48 hours including the following parameters. This will help determine if a problem is with the cabling, node, PLC or the network configuration.

-Device status

-Input/output errors

Network Node Parameters

Display and validate network node details quickly

The NaviTEK IE (R151010) uses the following protocols to display the most important network node parameters.

Discovery and Control Protocol (DCP)

Simple Network Management Protocol (SNMP)

Link Layer Discovery Protocol (LLDP)

Perform a health check to identify issues before network failures occur

The health check feature provides a quick indication of how each device is performing with an easy to understand traffic light system. By clicking on each device, users will see why the device is categorized as amber or red and corrective action can be taken.

HEALTH CHECK KEY

Green indication

No abnormal events detected
No errors
No alarms
No duplicated IP address or name
Link traffic load below 10%

Amber indication

No critical events detected and device is still operational
Packet errors occur but at an acceptable limit
Link load 10% - 50%
Another identical device model found but has different firmware / hardware version
Device speed is 10Mb/s
Device port half duplex

Red indication

Critical events detected and device may not be operational
No or duplicate name set
Duplicated or wrong IP address set
No or wrong device subnet mask set
Device communication failure
Device IP outside the tester subnet mask
Packet errors exceeding acceptable limits
Link load > 50%

Locate hidden or poorly labelled devices

Quickly identify a specific device with the NaviTEK IE ((R151010)) by flashing its LEDs.

Quickly identify a specific device with the NaviTEK IE by flashing its LEDs

Flashing LEDs

Test Reporting

NaviTEK IE ((R151010)) automatically generates test reports in PDF or CSV format.

The summary page of each report can be customized to include logo, company and operator details. Choose between 3 different reports than can show either passed, failed or all test reports in each report: