TREND Networks SignalTEK NT

Our Part No. R156005

Mfr. Model SignalTEK NT

Skip to the end of the images gallery

Skip to the beginning of the images gallery

TREND Networks SignalTEK NT

Our Part No. R156005

Mfr. Model SignalTEK NT

The Trend Networks R156005 SignalTEK NT Copper and Fiber Network Transmission Tester allows technicians to install, maintain or troubleshoot data cabling and Ethernet networks to prove performance up to Gigabit Ethernet transmission rates.

SignalTEK NT copper/fiber network tester
Installation testing
Network load testing through switches simulating CCTV/IPTV/VoIP/Web traffic
Port blink to visually trace cable from work area outlet to network switch

$2,370.00

This item ships FREE

Request a Quote

Key Features

SignalTEK NT copper/fiber network tester
Installation testing
TREND Networks, formerly known as IDEAL Networks

Cabling:

Network traffic performance test on copper and fiber to IEEE802.3ab standard
Wiremap test for open, shorts, miswires and split pairs to TIA-568 standard
Gigabit link verification for copper and fiber cabling
Use list of wiremap templates for common Ethernet cable types including CAT 6A/7A/8, and non-Ethernet cable, such as Profinet and ISDN

Active network:

Network load testing through switches simulating CCTV/IPTV/VoIP/Web traffic
PoE/PoE+ verification that displays available voltage at device location
Check Ethernet connectivity at device location to 10/100/1000 Mb/s
Verify network configuration (device IP/gateway address/subnet mask)
Switch port identification via LLDP/CDP protocols
Troubleshooting/diagnostics

Cabling:

Distance to fault using TDR technology (copper only)
Ability to identify and trace cables with compatible amplifier probe (optional 62-164 not included)
Optical power indication (with compatible SFP modules)
Active network:
Network load testing through switches simulating CCTV/IPTV/VoIP/Web traffic
Stress test network before installing bandwidth hungry devices
Port blink to visually trace cable from work area outlet to network switch
Displays port ID of LLDP/CDP enabled switches to eliminate manual cable tracing
Identify network connection problems as hardware, network or configuration faults
Ping local network devices and Internet URL's
Count number of hops between network points with traceroute tests
PoE load testing to confirm available power meets PoE device requirements

Details

The TREND Networks (formerly IDEAL Networks) R156005 SignalTEK NT Copper and Fiber Network Transmission Tester allows technicians to install, maintain or troubleshoot data cabling and Ethernet networks to prove the performance up to Gigabit Ethernet transmission rates.

By simulating actual network traffic users are able to test and document network and data cable performance to Gigabit Ethernet standards.

Where system warranties are not required the SignalTEK NT (R156005) is a cost effective way of proving that copper and fiber networks provide error-free performance.

Transmission testing proves real performance

There is no industry standard defining the testing requirements of cable qualifiers, consequently passing a qualification test does not prove that the installed structured cabling will provide flawless data transmission.

Uniquely, SignalTEK NT (R156005) utilizes a test method known in wide area networks as transmission testing to prove the performance of a network by sending real Ethernet data frames through the cabling and/or network devices to compare the error rate against the IEEE802.3ab Gigabit Ethernet standard. This provides a clear standards based Pass/Fail of the link being tested.

SignalTEK NT (R156005) requires no configuration from the user as the two handsets automatically pair ready for testing; just select a usage scenario to simulate the appropriate service, from VoIP to CCTV, Video and web traffic.

More Information