TREND Networks R157001
SignalTEK 10G FT Ethernet Troubleshooter and Bandwidth Tester with Fiber Testing
R157001
R157001
TREND Networks R157001
SignalTEK 10G FT Ethernet Troubleshooter and Bandwidth Tester with Fiber Testing
R157001
R157001
The Trend Networks R157001 SignalTEK 10G FT Ethernet Troubleshooter and Bandwidth Tester with Fiber Testing measures the maximum bandwidth of the network cabling up to 10 Gigabits per second. By simulating actual network traffic users can test, troubleshoot and document network and data cable performance up to 10 Gigabit Ethernet standards.
- Complete connectivity: Wi-Fi connectivity to the AnyWARE Cloud management system
- Displays voltage and which pairs have PoE
- SignalTEK 10G FT ethernet troubleshooter and bandwidth tester with fiber testing
- Complete connectivity: Wi-Fi connectivity to the AnyWARE Cloud management system; USB connection for transferring test data
- Partner finder: Provides audible tone and visible indicator when connected to remote units
- Built-in PDF reporting: Reports can be generated directly from SignalTEK 10G as well as Cloud
- Intuitive user interface: Simplified user interface for easy setup and operation
- Touchscreen: High resolution impact resistant touchscreen for ease of use
- Internal load speaker: Audible tones assist users while testing
- Rugged design: Rubberized housing, protected screen and protected measurement port
- Label printer connectivity: Easily send label IDs to printers for fast and accurate labeling
- TREND Networks, formerly known as IDEAL Networks
Copper Testing:
- Max bandwidth test up to 10Gb/s
- Data transmission test 1/2.5/5/10Gb
- NbaseT/Multi-Gigabit test 1/2.5/5/10Gb
- Wiremap, distance to fault, length
- Cable tracing (with compatible probe, not included)
- Pass / Fail to copper IEEE standards
PoE Testing:
- Pass/Fail to PoE IEEE standards
- Max power available (up to 90 watts)
- Type (af/at/bt) and Class (0 to 8)
- Displays voltage and which pairs have PoE
Fiber Testing:
- Optical Tx/Rx power indication
- Max bandwidth test up to 10Gb/s
- Data transmission test 1/10Gb
- Pass / Fail to fiber IEEE standards
- SFP temperature, vendor and model
- Supports SFP/SFP+ (MM and SM)
The TREND Networks (formerly IDEAL Networks) R157001 SignalTEK 10G FT Ethernet Troubleshooter and Bandwidth Tester with Fiber Testing measures the maximum bandwidth of the network cabling up to 10 Gigabits per second. By simulating actual network traffic users can test, troubleshoot and document network and data cable performance up to 10 Gigabit Ethernet standards.
SignalTEK 10G FT (R157001) has built-in Wi-Fi connectivity to connect seamlessly to the free AnyWARE Cloud test management system. AnyWARE Cloud offers pre-configuration to eliminate errors on-site, label printer connectivity to save time and "proof of performance" PDF reports for the clients.
What is the maximum error-free bandwidth the cabling / infrastructure can support?
The max throughput test takes the guesswork out of existing cabling infrastructure. With one test you can easily see what hardware or applications would work on an existing link saving time and reducing the cost of replacing expensive data cabling.
Fiber Testing Screenshot
Fiber Testing
Verify fiber link speed to 1G or 10G, measure optical power and data throughput.
Validate Fiber Link Speed - The fiber link speed test confirms the connection is 1G or 10G which can be affected by cable length or signal loss.
Troubleshoot Fiber Cable Issues - The Tx and Rx optical power measurement is compared to the expected power level to determine attenuation in a fiber link.
Easy to understand traffic light status - The simple traffic light indicator displays Good, Marginal or Poor power level based on IEEE 802.3 1G/10G limits.
Max throughput test - The SignalTEK 10G FT (R157001) will prove the maximum available bandwidth over the fiber link up to 10Gb/s.
Discover a faulty SFP - The SFP temperature is measured to help understand if it has become faulty.
10G/Multi-Gigabit Performance
The SignalTEK 10G FT (R157001) will help to increase network bandwidth without replacing expensive cable infrastructure, troubleshoot PoE and Ethernet issues and prove the maximum bandwidth up to 10 Gigabits per second.
PoE Testing. Eliminate Guesswork
PoE Testing
No more trial and error - Accurately measure the maximum power available
Supports PoE up to 90W (PoE++) - Test all PoE Classes (0-8) and Types (af/at/bt)
Identifies the powered pairs - Determine whether power is from a switch or midspan injector
Verify the PoE installation - Pass / Fail indication to IEEE standards
Extended power test - Some switches may provide power exceeding their IEEE Class rating; measure the maximum available power up to 90 watts
PoE Test Results
Adoption of Power over Ethernet (PoE) - In just a few short years we have seen many different applications increasingly adopt PoE, such as monitors, digital signage, phones, security cameras, lighting and access control.
Previously technicians had to understand all the various standards, device power outputs and cable lengths to be sure a device will operate successfully.
The SignalTEK 10G FT (R157001) identifies the Class of the PoE source and power available up to 90W to a PoE device regardless of cable length, cable quality or other factors. A clear pass/fail is provided to IEEE 802.3af/at/bt standards.
Cloud Jobs Screen
Test Management Software
The AnyWARE Cloud management system allows real time collaboration between Project Managers and Field Technicians. There is no need for Field Technicians to setup the SignalTEK 10G FT (R157001), Project Managers pre-configure the jobs and tests in the AnyWARE Cloud, eliminating potential mistakes and compressing the time taken to prepare reports for customers.
Cloud Test Result Screen
Cloud Software
Operates anywhere with a web browser - AnyWARE Cloud operates on a PC, Mac and tablet devices (Android and iOS)
Free storage - No need for separate servers or backup systems.
Easy to find project files - Attach all project files including cable layout drawings, videos, and photos into the AnyWARE Cloud. Everything you need in one place.
Share reports easier - Use AnyWARE Cloud to share links to the test reports eliminating the need to manually email large attachments.
Reduce training time with WalkMe - AnyWARE Cloud is embedded with the WalkMe digital adoption platform providing proactive, step-by-step guidance on all key tasks.
Fleet Management
Easily manage the certifier fleet - Fleet manager allows you to see who has the SignalTEK 10G FT (R157001), when the software was last updated and when the results were last synced. Allowing you to manage tester downtime and ensuring results are transferred back to the office, not lost or deleted.
Professional PDF Reporting
Customer profiles - Create a profile for each of the customers with their company logo, address and contact details. This information is automatically pulled through to the reports, saving time.
Report Formats:
- Summary report - This is a report showing multiple tests per page.
- Detailed report - This is a comprehensive report with all the measurement results with one page per test.
Reports can be generated on the SignalTEK 10G FT (R157001) or on the free TREND AnyWARE Cloud
| Country of Origin | Poland |
|---|---|
| Brand | TREND Networks |
| Condition | NEW |
| Vendor Alias | R157001 |
- 1 - Set of SignalTEK 10G Display/Remote Handsets with Fiber Testing
- 2 - Li-ion Batteries
- 2 - Hanging Straps
- 2 - Power Supplies
- 2 - 2m Cat 6A Shielded Patch Cables
- 1 - Carrying Case
- 1 - Quick Reference Guide
