TREND Networks SignalTEK 10G NT
SignalTEK 10G NT Ethernet Troubleshooter and Bandwidth Tester with Network Testing
R157002
SignalTEK 10G NT
TREND Networks SignalTEK 10G NT
SignalTEK 10G NT Ethernet Troubleshooter and Bandwidth Tester with Network Testing
R157002
SignalTEK 10G NT
The Trend Networks R157002 SignalTEK 10G NT Ethernet Troubleshooter and Bandwidth Tester with Network Testing measures the maximum bandwidth of the network cabling up to 10 Gigabits per second. By simulating actual network traffic users can test, troubleshoot and document network and data cable performance up to 10 Gigabit Ethernet standards.
- Complete connectivity: Wi-Fi connectivity to the AnyWARE Cloud management system
- Displays voltage and which pairs have PoE
- SignalTEK 10G NT ethernet troubleshooter and bandwidth tester with network testing
- Complete connectivity: Wi-Fi connectivity to the AnyWARE Cloud management system; USB connection for transferring test data
- Partner finder: Provides audible tone and visible indicator when connected to remote units
- Built-in PDF reporting: Reports can be generated directly from SignalTEK 10G as well as Cloud
- Intuitive user interface: Simplified user interface for easy setup and operation
- Touchscreen: High resolution impact resistant touchscreen for ease of use
- Internal load speaker: Audible tones assist users while testing
- Rugged design: Rubberized housing, protected screen and protected measurement port
- Label printer connectivity: Easily send label IDs to printers for fast and accurate labeling
- TREND Networks, formerly known as IDEAL Networks
Copper Testing:
- Max bandwidth test up to 10Gb/s
- Data transmission test 1/2.5/5/10Gb
- NbaseT/Multi-Gigabit test 1/2.5/5/10Gb
- Wiremap, distance to fault, length
- Cable tracing (with compatible probe, not included)
- Pass / Fail to copper IEEE standards
PoE Testing:
- Pass/Fail to PoE IEEE standards
- Max power available (up to 90 watts)
- Type (af/at/bt) and Class (0 to 8)
- Displays voltage and which pairs have PoE
Network Testing:
- Switch speed: 100M, 1G, 2.5G, 5G, 10G
- VLAN, PING, TraceRoute, Hub blink, NetScan
- CDP/LLDP/EDP port information
- Uptime efficiency and 72 hour event log
- Testing with packet loss, jitter and delay
- Prove network performance up to 10G
The TREND Networks (formerly IDEAL Networks) R157002 SignalTEK 10G NT Ethernet Troubleshooter and Bandwidth Tester with Network Testing measures the maximum bandwidth of the network cabling up to 10 Gigabits per second. By simulating actual network traffic users can test, troubleshoot and document network and data cable performance up to 10 Gigabit Ethernet standards.
SignalTEK 10G NT (R157002) has built-in Wi-Fi connectivity to connect seamlessly to the free AnyWARE Cloud test management system. AnyWARE Cloud offers pre-configuration to eliminate errors on-site, label printer connectivity to save time and "proof of performance" PDF reports for the clients.
What is the maximum error-free bandwidth the cabling / infrastructure can support?
The max throughput test takes the guesswork out of existing cabling infrastructure. With one test you can easily see what hardware or applications would work on an existing link saving time and reducing the cost of replacing expensive data cabling.
10G/Multi-Gigabit Performance
The SignalTEK 10G NT (R157002) will help to increase network bandwidth without replacing expensive cable infrastructure, troubleshoot PoE and Ethernet issues and prove the maximum bandwidth up to 10 Gigabits per second.
Network Testing
The SignalTEK 10G NT (R157002) is also a network tester for troubleshooting and maintenance of active and passive copper and fiber networks.
Port and Network Summary/p>
VLAN Detection and Operation
Custom Wiremap
CDP/LLDP/EDP Port Information
Netscan
72-Hour Event Log
72-hour event log captures network events down to the second eliminating guesswork
SignalTEK 10G NT (R157002) logs all network events over a 72-hour period to help diagnose connectivity issues faster, reducing hours onsite and reducing trips to the site. Leave the tester onsite, connect remotely to monitor network activity, view the event log and control all functions of the tester from the office.
PoE Testing. Eliminate Guesswork
PoE Testing
No more trial and error - Accurately measure the maximum power available
Supports PoE up to 90W (PoE++) - Test all PoE Classes (0-8) and Types (af/at/bt)
Identifies the powered pairs - Determine whether power is from a switch or midspan injector
Verify the PoE installation - Pass / Fail indication to IEEE standards
Extended power test - Some switches may provide power exceeding their IEEE Class rating; measure the maximum available power up to 90 watts
PoE Test Results
Adoption of Power over Ethernet (PoE) - In just a few short years we have seen many different applications increasingly adopt PoE, such as monitors, digital signage, phones, security cameras, lighting and access control.
Previously technicians had to understand all the various standards, device power outputs and cable lengths to be sure a device will operate successfully.
The SignalTEK 10G NT (R157002) identifies the Class of the PoE source and power available up to 90W to a PoE device regardless of cable length, cable quality or other factors. A clear pass/fail is provided to IEEE 802.3af/at/bt standards.
Cloud Jobs Screen
Test Management Software
The AnyWARE Cloud management system allows real time collaboration between Project Managers and Field Technicians. There is no need for Field Technicians to setup the SignalTEK 10G FT (R157001), Project Managers pre-configure the jobs and tests in the AnyWARE Cloud, eliminating potential mistakes and compressing the time taken to prepare reports for customers.
Test Management Software
Cloud Test Result Screen
Cloud Software
Operates anywhere with a web browser - AnyWARE Cloud operates on a PC, Mac and tablet devices (Android and iOS)
Free storage - No need for separate servers or backup systems.
Easy to find project files - Attach all project files including cable layout drawings, videos, and photos into the AnyWARE Cloud. Everything you need in one place.
Share reports easier - Use AnyWARE Cloud to share links to the test reports eliminating the need to manually email large attachments.
Reduce training time with WalkMe - AnyWARE Cloud is embedded with the WalkMe digital adoption platform providing proactive, step-by-step guidance on all key tasks.
Fleet Management
Easily manage the certifier fleet - Fleet manager allows you to see who has the SignalTEK 10G NT (R157002), when the software was last updated and when the results were last synced. Allowing you to manage tester downtime and ensuring results are transferred back to the office, not lost or deleted.
Professional PDF Reporting
Customer profiles - Create a profile for each of the customers with their company logo, address and contact details. This information is automatically pulled through to the reports, saving time.
Report Formats:
- Summary report - This is a report showing multiple tests per page.
- Detailed report - This is a comprehensive report with all the measurement results with one page per test.
Reports can be generated on the SignalTEK 10G NT (R157002) or on the free TREND AnyWARE Cloud
| Country of Origin | Poland |
|---|---|
| Brand | TREND Networks |
| Condition | NEW |
| Vendor Alias | R157002 |
- 1 - Set of SignalTEK 10G Display/Remote Handsets with Network Testing
- 2 - Li-ion Batteries
- 2 - Hanging Straps
- 2 - Power Supplies
- 2 - 2m Cat 6A Shielded Patch Cables
- 1 - Carrying Case
- 1 - Quick Reference Guide
