Triplett LVPRO30SR
Low Voltage Pro Multifunctional Cable & Network Tester with Smart Remotes, RJ45 & Coax ID Remotes, 10/100/1000 Detection
LVPRO30SR
LVPRO30SR
Triplett LVPRO30SR
Low Voltage Pro Multifunctional Cable & Network Tester with Smart Remotes, RJ45 & Coax ID Remotes, 10/100/1000 Detection
LVPRO30SR
LVPRO30SR
The Triplett LVPRO30SR Cable/Network Tester Kit w/ Smart Remotes is a long-term monitoring device which can remain inline between 2 devices without affecting the communication. The cable testing procedures includes Cable Map, Ethernet Switch Port Blink, Speaker Pop, Cable Length, PoE Volts, Battery Test, and 10/100/1000 indication.
- Voltage Protection (AC/DC): 70/100V
- Cable Tests: Opens, shorts, reversals, split pairs, wiremap, propagation delay, skew, ohms
- Performs detailed wire map
- Measures cable length and distance to open or short
- Included Smart Remotes test and ID the cable with a single pass
- Tests Coax and RJ11 cables for faults
- Checks line voltage on RJ45 (PoE) and telephone lines
- Measures incoming data speed 10/100/1000
- Loads test batteries
- Adjustable backlit display and detachable remote
- Store up to 250 printable reports
- Web upgradable for expanded functionality
- Included Functions:
- Cable Testing: Cable diagram, Pass/Fail, timing (delay, skew), and impedance (ohms)
- Wall Jack ID: Locate multiple wall jacks for CAT5/6 and coax
- Speaker Popper: Locate speakers by audibly "popping" them
- SPKR 7.1 ID# Mapper: Map and label A/V speaker wires (requires remote kit, sold separately)
- Port Blink Cable Detection: Locate cable connection to switch port by blinking switch's Link LED
- Tone Cable Detection: Place tone on one end and detect it on far end (requires Remote Tone Probe, sold separately
- Alert LEDs (Links, Volts): Two LEDs quickly alert you to an active switch connection or voltage on the line
- Length: Measures cable length, distance to open or short; suitable for all wire types (use built-in VOP values or calibrate with your cable)
- Return Loss Quality (RLQ): Tests for load mismatches that affect the wire's power and data transfer capability
- 10/100/1000 Detection & Display: Plug into any active port (computer, switch, VoIP, access point) and display its capabilities
- PoE / Pairs: Detect PoE voltage and display its amplitude and location on the cable (midspan, endspan or both)
- CCTV / Vpp (peak to peak voltage): Measure and display Vpp of video signal
- Phone: Display voltage and cable location (up to 4 phones); detect central office telephone connections
- Loaded Battery Test: Test alarm system and other backup batteries by doing a loaded battery test
The Triplett LVPRO30SR Low Voltage Pro Multifunctional Cable & Network Tester with Smart Remotes is capable of running a variety of cable testing procedures, including Cable Map, Ethernet Switch Port Blink, Speaker Pop, Cable Length, PoE Volts, Battery Test, and 10/100/1000 indication. The LVPro can store up to 250 results for later printing and features an adjustable backlit display as well as the capability to attach Test Modules. The LVPro is compatible with speaker cable, coax, alarm cable and Category cable (CAT5,6); furthermore, if you have a unique cable, the LVPro has adjustable VOP, a technology that allows it to be tuned to your cable.
| Country of Origin | United States |
|---|---|
| Brand | Triplett |
| Condition | NEW |
| UPC | 614395003852 |
| Vendor Alias | LVPRO30SR |
- 1 - LVPRO Main Unit
- 1 - Detachable Remote
- 10 - RJ45 Remotes
- 10 - Coax Remotes
- 3 - RLQ Adapters
- 1 - F Male to BNC Male
- 1 - F Male to BNC Female
- 2 - RJ45 Patch Cables
- 1 - RJ45 to Alligator Clip Adapter
- 1 - USB Cable
- 4 - AA Batteries
- 1 - User Manual
