Triplett POE2000
PoE Tester Pro
POE2000
POE2000
Triplett POE2000
PoE Tester Pro
POE2000
POE2000
The Triplett POE2000 PoE Tester Pro Inline PoE Detector is designed to speed up the installation and troubleshooting of PoE system devices. This unit can detect PSE-type/class, power source, polarity, voltage, current, power, and whether it is End Span (1/2, 3/6), Midspan (4/5, 7/8), or across all 4 pairs. Included is a test mode that can determine if a standard PoE or non-standard passive PoE is being used.
- Max Current: 990mA/50W per mode; Total 2A/100W
- 4 LEDs indicate IEEE802.3af or 802.3at/bt standard
- Dual 7-digit LEDs indicate power source either end (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both for bt
- 2 Yellow LEDs indicate reversed polarity for power type
- Display alternates between Voltage, Current and Power with a step button for selecting specific data to display
- No batteries required, uses system power when connected to a device.
The Triplett POE2000 helps to speed up the installation and troubleshooting of PoE system devices. It can detect PSE-type/class, power source, polarity, voltage, current, power, and whether it is End Span (1/2, 3/6), Midspan (4/5, 7/8), or across all 4 pairs. If you are a VoIP phone and IP camera installer, you will know if there is power and a data pair available for your equipment. The Triplett POE 2000 has a test mode that can determine if a standard PoE (36 to 60V) or non-standard (11 to 60V) passive PoE is being used. For inline power level monitoring the POE2000 has a display that alternates between Voltage, Current and Power and incorporates a step button for selecting specific data to display. No batteries required, uses system power when connected to a device.
| Country of Origin | Taiwan, Province of China |
|---|---|
| Brand | Triplett |
| Condition | NEW |
| UPC | 614395002039 |
| Vendor Alias | POE2000 |
