Triplett POE3000

Our Part No. POE3000

Mfr. Model POE3000

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Triplett POE3000

Our Part No. POE3000

Mfr. Model POE3000

The Triplett POE3000 In-Line PoE Tester Pro detects PSE-type and class, power source, polarity, voltage, current, power, and whether it is End Span, Midspan, or across all 4 pairs. When used in-line, the display alternates between voltage, current, and power with a step button for selecting specific data to display.

Voltage Range: 36V to 60V (Standard PoE), 11V to 60V (Non-Standard)
Max. Current (Based on 50V): 990 mA/50W per mode, 2A/100W total

Please call

Key Features

Passes Thru Voltage and Data: Detects various PoE parameters, allows passage of voltage/data, ensuring seamless power/data transmission in PoE system
Streamlines Installation/Troubleshooting: Helps speed up installation/troubleshooting of PoE system devices
IEEE802.3af/802.3at/bt Detection: 4 LEDs indicate IEEE802.3af, 802.3at/bt standard compliance
Comprehensive Detection: Detects PSE-type/class/power source/polarity/voltage/current/power, determines End Span/Midspan/across all 4 pairs
Standard vs. Non-Standard PoE: Determines standard PoE (36V to 60V)/non-standard (11V to 60V) passive PoE
Polarity Reversal Indication: 2 Yellow LEDs indicate reversed polarity for power type
In-Line Power Level Monitoring: Alternates between displaying voltage, current, power with step button for data selection
No Battery Required: Uses system power when connected to device

Applications

Speeds up installation/troubleshooting of PoE system devices
Alerts VoIP phone/IP camera installers if power/data pair is available for their equipment

Specifications

Connector Interface: 2x RJ45 (PSE/PD Test Jacks)
Voltage Range: 36V to 60V (Standard PoE), 11V to 60V (Non-Standard)
Max. Current (Based on 50V): 990 mA/50W per mode, 2A/100W total
Function Selection Mode: Detecting PSE status (T Mode), Determining non-standard PoE/in-line testing (N Mode), Testing/monitoring real-time power status (I Mode)
Display: 4 LEDs indicate IEEE802.3af/802.3at/bt standard, Dual 7-digit LEDs indicate power source either end (A) Span (1/2, 3/6), Mid (B) span (4/5, 7/8), both for BT, 2 Yellow LEDs indicate reversed polarity for power type, Display alternates between voltage/current/power
Step Button: For selecting specific data to display
Power: Uses system power when connected to device
Dimensions: 3.9 in. x 1.4 in. x 1 in. (99 mm x 36 mm x 26 mm)

Details

The Triplett POE3000 In-Line PoE Tester Pro is a valuable tool that streamlines the installation and troubleshooting of PoE (Power over Ethernet) system devices. This tool simplifies the process by offering various detection capabilities. The tester's four LEDs indicate whether it complies with IEEE802.3af or 802.3at/bt standards. The POE3000 can detect PSE (Power Sourcing Equipment) type or class, power source, polarity, voltage, current, power, and determine if it is End Span (1/2, 3/6), Midspan (4/5, 7/8), or across all 4 pairs.

For added convenience, the POE3000 can differentiate between standard PoE (36V to 60V) and non-standard (11V to 60V) passive PoE, making it suitable for various PoE setups. The unit also includes two yellow LEDs to indicate reversed polarity for power type.

The POE3000 provides in-line power level monitoring that alternates between displaying voltage, current, and power. This unit incorporates a step button for selecting specific data to display. No batteries are required as the unit utilizes system power when connected to a device.

More Information