UEi C165+OILKIT-N
Residential/Commercial Combustion Analyzer Kit Oil-Fired Appliances, Printer and NIST Calibration
UEi C165+OILKIT-N
Residential/Commercial Combustion Analyzer Kit Oil-Fired Appliances, Printer and NIST Calibration
The UEi C165+OILKITN Residential/Commercial Combustion Analyzer Kit for Oil-Fired Appliances with Printer equips HVAC/R professionals to install and maintain furnaces and boilers. The C165+ has multiple sensor protections and altitude compensation. The LINK feature connects to the included wireless temperature pipe clamps.
- Includes NIST Calibration
- Measures: CO, CO2, Differential Pressure, Flue and Inlet Temperature
- Room CO test
- Heat Exchange test
- Includes NIST Calibration
- Measures: CO, CO2, Differential Pressure, Flue and Inlet Temperature
- Calculates: Differential Temperature, Efficiency (Net, Gross), Excess Air
- Kit Measures: Flue Gas Smoke to see if it is within normal range
- Up to 10-Year warranty with annual recertification
- Eligible for UEi Service+
- LINK to wireless probes
- Flow and Return Probes
- 4 types of sensor protection
- NOx filtered and H2 Compensated CO sensor (10,000ppm range)
- Over-range protection pump
- Low Flow Detection
- Compatible with DTHA2
- Wireless connection to Free Printer App (iOS and Android Compatible)
- Room CO test
- Differential Pressure
- Heat Exchange test
- Protective water trap
- Kit includes IR Thermal Printer and Printer Paper Roll, and Smoke Pump Test Kit
The UEI C165+OILKITN Residential/Commercial Combustion Analyzer Kit for Oil-Fired Appliances with Printer equips HVAC/R professionals to install and maintain furnaces and boilers to optimize efficiency and reduce fuel costs.
Backed by UEi Service+ to give up to 10 years’ warranty, next day recertification, and a reduced cost of ownership. The C165+OILKITN Residential/Commercial Combustion Analyzer is easy to use with a rugged design, multiple sensor protections, altitude compensation and differential pressure. Prints to included printer and wireless App. The new LINK feature connects the included wireless pipe clamp temperature probes and other optional probes to the C165+. Essential information for installing and maintaining furnaces and boilers all in one device. With included Smoke Pump Test Kit.
C165+OILKITN enables a LINK feature to connect to wireless probes. The LINK feature connects to the 2 wireless temperature pipe clamps (WPC2), which can be used to compare flow and return temperatures on a boiler. C165+OILKITN LINK also connects the optional DTHA2 to measure air flow. Contractors can use the Room CO test to take snap shots of ambient CO readings to view trending CO levels. C165+OILKITN has four levels of sensor protection; an H2 compensated 10,000 ppm CO sensor, CO over-range purge pump, a NOx filtered CO sensor, and Low Flow Detection to protect the CO sensor. It offers differential pressure and has wireless capabilities to a Printer App for compatible iOS and Android devices. It also has sensor technology that reduces the cost of ownership. It features a Heat Exchanger test to check the exchanger integrity and differential temperature. The C165+OILKITN comes with High Altitude compensation to maintain accurate readings, an auto-purge shut off, and 8 Pre-programmed fuels including Natural Gas and Propane.
The C165+OILKITN has a 6-Line display to view readings on one screen, which is a favorite among technicians. The Digital Multimeter style dial makes it easy to select the test needed. It also features a water trap to protect the sensor with a check light to remind to look for condensate built-up, a magnetic boot for hands-free operations, and an IR printer port to print to the IR thermal printer, making it easy to document test results for later analysis.
Brand | UEi |
---|---|
Condition | NEW |
- 1 - Residential/Commercial Combustion Analyzer for Oil-Fired Appliances
- 1 - Flue Probe (CP2)
- 1 - IR Thermal Printer (IRP-2)
- 1 - Printer Paper Roll (16646)
- 1 - Smoke Pump Test Kit
- 3 - Rechargeable Batteries (AA)
- 1 - USB Charging Cable (WIR0067)
- 2 - Wireless Pipe Clamp Probes (WPC2)
- 1 - Tubing with Connector (11000)
- 2 - K-Type Thermocouples (ATT29)
- 1 - Smoke Pump Test Kit (SPT1)
- 1 - Particle Filter (17631)
- 1 - Carrying Case (AC509)
- 1 - NIST Calibration
- 1 - User Manual