UEi DL589-N
True-RMS Clamp Meter, 750/1000V AC/DC, 600A AC/DC with DC Amps, InRush and NIST-Calibration
DL589N
DL589-N
UEi DL589-N
True-RMS Clamp Meter, 750/1000V AC/DC, 600A AC/DC with DC Amps, InRush and NIST-Calibration
DL589N
DL589-N
The UEi DL589N Clamp Meter checks system boards and live wires by measuring capacitance, voltage, microamps, circuit continuity resistance, and temperature via K-Type thermocouples and flame sensing. The DL589N comes with silicone test leads, back probes, alligator clips, temperature probes, zippered pouch, batteries, and a manual.
- NIST-Calibration
- AC Volts: 750VAC
- DC Volts: 1000VDC
- AC current (amps): 600A AC
- DC current (amps): 600A DC
- NIST-Calibration
- TRMS: Yes
- AC Volts: 750VAC
- DC Volts: 1000VDC
- AC current (amps): 600A AC
- DC current (amps): 600A DC
- AC micro current (amps): 2000µA
- DC micro current (amps): 2000µA
- Resistance (Ohms): 60MOhms
- Capacitance (Farads): 6000µF
- Frequency (Hertz): 99.99kHz
- Duty cycle: 1.0 to 99.0%
- Temperature: -328˚ to 2462˚F
- Continuity: Yes
- Diode: Yes
- NCV Detection: Yes
- Differential Temperature: Yes
- K-type Temperature Range: -328˚ to 2462˚F
- LRA Inrush: Yes
- Low Z: Yes
- Warranty: 2 Year limited
The UEi DL589N Clamp Meter checks system boards and live wires by measuring capacitance, voltage, microamps, circuit continuity resistance, and temperature via K-Type thermocouples and flame sensing. The DL589N comes with silicone test leads, back probes, alligator clips, temperature probes, zippered pouch, batteries, and a manual.
Brand | UEi |
---|---|
Condition | NEW |
Vendor Alias | DL589-N |
- 1 - DL589N TRMS Clamp Meter
- 1 - Manual
- 1 - Set of Silicone Test Leads (ATL58)
- 1 - Set of Alligator clips (AAC3)
- 2 - Back Probes (ABP3)
- 4 - Batteries (AAA)
- 1 - Zippered Pouch/Cases
- 2 - Temp Probes (ATT29)
- 1 - Set of K-Type Thermocouples