Vitrek 981i
Teraohmmeter/IR Tester, 6.5KV, with Test Lead Kit and NIST Traceable Calibration Certificate
Vitrek 981i
Teraohmmeter/IR Tester, 6.5KV, with Test Lead Kit and NIST Traceable Calibration Certificate
The Vitrek 981I 6.5kVDC Teraohmmeter/IR Tester with Test Lead Kit/NIST Traceable Calibration Certificate features the ability to work into capacitive loads due to the DSP technology which provides dwell times as low as 100 milliseconds. Up to four 64 channel HV scanners are able to be controlled by this unit right out of the box.
- Standard Interfaces: Ethernet, RS232, Digital I/O, Scanner Control
- DC Output Voltage: 30V - 6500V
- Memory of up to 100 tests
- 6.5KV maximum output
- Fast IR Readings - High speed output control with Dual Coldfire microprocessors and Dual DSPs to provide dwell times as low as 100ms
- High Resistance Measurement Range - Transfer measurements up to 150 Teraohms
- Expansive Test Sequence Memory holds up to 100 tests with up to 254 steps per test
- Multi-Dwell Functionality
- Ethernet, RS232, Digital I/O, & Scanner Control - All Standard Interfaces
- Pico-Amp Leakage Measurement
- Test Specific Fixture & Cable
- Multi-Mode IR - Values up to one
- Continuously Variable IR Test Voltage
- Capacitive Loads - exceptional at performing IR tests on cabling, PV panels and CMC devices
- Measure IR on Grounded Loads
- Light Weight Design
- Safety Tested per EN 61010-1. EMC compliant to EN 61326-1
- Manual Test Mode
The Vitrek 981I Teraohmmeter is designed to tackle the toughest High Resistance measurement applications including demanding applications that most other IR testers won't measure up to. So when it's time to test higher voltage IR values like today's electric vehicle systems and higher voltage solar arrays - look to Vitrek to deliver the IR tester you need for your production line.
What sets the Vitrek 981I IR tester apart from the others?
For starters, these units are based on Vitrek's proven DSP technology - so they have the ability to work into capacitive loads where most others do not. And when it comes to output voltage range, Vitrek delivers - with up to 6.5 KVDC.
Need to measure IR on a Multi-Conductor Cable Harness?
The 981i has the ability to directly control up to four 64 channel HV scanners, right out of the box. That is up to 256 test points and using a PC with Vitrek's Q-Test software you can expand the count up to 1020 test points.
Country of Origin | United States |
---|---|
Brand | Vitrek |
Condition | NEW |
Vendor Alias | 981I |
- 1 - TL-980 Test lead kit
- 1 - NIST calibration certificate