Vitrek DL215
150V/42A/250W Electronic DC Load with 7.25kW/65A Transient Capacity
DL215
DL215
Vitrek DL215
150V/42A/250W Electronic DC Load with 7.25kW/65A Transient Capacity
DL215
DL215
The Vitrek DL215 150V/42A/250W Electronic DC Load with 7.25kW/65A Transient Capacity is equipped with a full color LCD touchscreen display and can be quickly set up for testing. The unit's self-test feature ensures that all loading and measurement circuitry is functioning properly. The arbitrary loading sequence includes up to 100 steps to simulate virtually any 'real world' loading.
- Input Voltage: 0 - 150V
- Max. Current >1s: 42A
- Max. Power >1s: 250W
- Input Voltage: 0 to 150V
- Max. Current >1s: 42A
- Max. Power >1s: 250W
- Transient Capacity: 7.25kW/65A
- Easy-to-use color touchscreen for quick setup, measurement configuration, channel selection and use
- High accuracy measurements (0.05%) of voltage and current within pulses or sweep steps as short as 20µs
- Generates kW, mW or µW loading
- >20:1 higher and >1000:1 lower loading capability range than most presently available DC loads
- Transient and non-linear loading capabilities ranging from 125 to 500 watts with sweep capability
- Wide bandwidth non-linear loading modes
- Arbitrary loading sequence with up to 100 steps to simulate virtually any "real-world" loading
- High speed pulsed loading up to 100kHz
- Fully configurable loading, rising, and falling edge controls and soft-start capability
- Excellent transient performance in timing and waveshape with ability for user to view current and voltage waveforms using internal scope
- Fully protected short loading, with automated current and power timing
- Comprehensive self-test gives assurance that all loading and measurement circuitry is properly functioning
- Unique graphical X/Y plotting of V vs I and V vs P characteristics using swept loading
- Historical data logging capability, both graphical and numerical
- Leading accuracy typically >10:1 better than other units at lower loading levels and >2:1 better at high loading levels, with ISO17025 traceability available
Displayed Results Include:
- 'Real-Time' Results:
- Numerically represented measured actual applied voltage and actual loading current, and computed load power and resistance or conductance
- Pulse Result:
- Numerically represented measured actual applied voltage and actual loading current within a pulse, and computed load power and resistance or conductance
- OCP or OPP Result:
- Numerically represented maximum current and power achieved prior to voltage dropping below set voltage
- Battery Test:
- Numerically represented accumulated A.Hr and W.Hr, as accumulated since operation was started with automatic stop at ending voltage
- Historical Data Logging:
- Graphically represented measured actual applied voltage and actual loading current and computed load power with down to 1ms resolution and long-term maximum
- Oscilloscope:
- Graphically represented up to 400kSPS sampled applied voltage and loading current
- XY Plot:
- Graphically represented V vs A/W plot of swept measurement results
The Vitrek DL215 150V/42A/250W Electronic DC Load with 7.25kW/65A Transient Capacity provides high accuracy measurements of voltage and current with a wide range of features, flexibility, and ultimate ease of use. Equipped with a full color LCD touchscreen display, the unit can quickly be set up for each test. In addition, the DL215 is equipped with a comprehensive self-test that ensures that all loading and measurement circuitry is functioning properly.
Extremely Flexible in a Variety of Applications
The DL215 is equally at home generating kW, W, mW or µW loading. Whether you are performing tests for LED drivers, batteries or battery chargers, the DL215 is the right choice for these applications.
Maximum Accuracy, Maximum Features
The unit is fully featured with transient and wide band non-linear loading capabilities along with the additional feature of sweep capability. The DL215 Electronic DC Load provides high accuracy measurements (± 0.05%) of voltage and current with sweep steps as short as 20µs and pulsed loading up to 100 kHz. The unit is fully configurable for loading riding and falling edge controls and soft-start capabilities. The DL215 provides excellent transient performance in timing and waveshape with the ability for the user to view the current and voltage waveforms using the internal scope. The device provides fully protected short loading with automatic current and power limiting.
Unequaled Visibility of Test Results
The DL215 provides graphical X/Y plotting of V vs I and V vs P characteristics using swept loading. In addition, the unit has a historical data logging capability, both graphical and numerical for additional test analysis and evaluation.
Flexible Integration in a Compact Package
The DL215 is just 5" high, 8.5" wide and 13" deep, allowing easy integration into any test bench. The unit provides a variety of interfaces including LAN, USB Device & Host and Digital I/O. In addition, multiple units may be used in parallel for static higher power and current loading (additional units sold separately).
| Country of Origin | United States |
|---|---|
| Brand | Vitrek |
| Condition | NEW |
| Vendor Alias | DL215 |
