Vitrek V71

Our Part No. V71

Mfr. Model V71

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Vitrek V71

Our Part No. V71

Mfr. Model V71

The Vitrek V71 AC/DC Hipot Tester and 5kVAC/DC Electrical Safety Tester with Continuity offers an easy-to-use color touch user interface and an ultra-reliable, efficient, fan-free design. Digital Signal Processing (DSP) technology offers improved speed. This unit includes USB, RS232, and Digital I/O interfaces.

Memory stores up to 999 steps/60 test sequences
4.3 in. Color Touch Display
Intuitive User Interface

Datasheet

$1,894.95 Price $2,080.00

This item ships FREE

Request a Quote

Key Features

5KVAC Electrical Safety tester with continuity
AC Hipot test:
- 10 to 5000V RMS, 50/60 Hz (2500V max on V76)
- Accuracy: 1% of setting +5V, No load to full load
- Resolution: 1V at all levels
- Max load current: 20mArms
DC Hipot test:
- 20 to 5000V
- Accuracy: 1% of setting+ 5V, No load to full load
- Resolution: 1V at all levels
- Max load current: 10mA
Low Resistance test:
- Resistance Range: 0ohm to 60Kohm
- Accuracy: 1.5%+0.015Ω (<13Ω), 3%+1ohm(<1KΩ), 5%(<13KΩ)
- Resolution: Down to 0.001Ω
- Min test time: 60 mS
4.3 in. Color Touch Display
Intuitive User Interface
Internal Self Test Fully Exercises Output and Verifies Current Accuracy
20mA max source current
Ground Bond 1-30A RMS (42 A peak), 100µΩ Resolution
100 nano-Amp Leakage Current Resolution
Low Cost of Ownership - 2 Year Calibration Interval
USB 2.0, Serial/RS232, Digital I/O Interfaces
Continuously Variable Insulation Resistance 20-5000V, 450GΩ Max
Multi Mode IR with Steady/Rising Pass Mode
Test Memory Stores up to 999 Steps and 60 Test Sequences
150μS Safety Shutdown
Meets UL, CSA, IEC Safety Tester Requirements, CE Safety Mark Certified to EN61010

Details

The Vitrek V71 Hipot Tester with Continuity 5 kV AC/DC offers an easy-to-use color touch user interface and an ultra-reliable, efficient, fan-free design. Digital Signal Processing (DSP) technology offers improved speed. The V71 includes USB, RS232, and Digital I/O interfaces.

Test options for this model are AC Hipot, DC Hipot, and Low Resistance tests. Test completion triggers are End on Time: Determination on final reading, End on Pass: Test ends with PASS for any reading within limits, End on Fail: Test ends with FAIL for any reading outside limits, and End on Steady: Test ends with PASS for a steady/rising reading within limits.

Front Panel Features

4.3 in. Color Touch Display
Large, Bright LED Caution Testing Indicator
Safety Locked HV Terminal for Hipot and IR
Low Profile High Current Binding Posts for Ground Bond
Independent LED Pass/Fail Indicators
Convenient Front Panel Power Switch
Ultra-High Reliability Start/Stop Switches

Rear Panel Features

Digital I/O with Safety Interlock
Controls up to 4 HV Scanners (N/A on V75 with built-in HV Switching)
USB 2.0 High Speed Universal Serial Port
RS232 Serial Port with Selectable baud rate up to 115Kbaud
Optional Rear Panel Terminals or on V75 16 terminals for Hipot/IR and Continuity
Rugged V7X with Drop Resistant Duty Silicone Bumper

Expanded Capabilities via QT Insite Test Automation Software

For users looking to manage their testing and improve throughput, safety, and quality, the QT Insite Test Automation Software License is available for separate purchase.

The QT Insite Software enables users to automatically initiate tests, then collect and store the results data. Test results can be tracked by part number and changes in performance can be shown by lot number. Barcode scanning allows users to recall the ready-to-run sequence of a specific DUT and multiple DUT numbers can be linked to a given sequence. With this software, the results of every test are recorded. Test results can be easily recalled and saved in the format of .pdf or .csv for quick reference along with the ability to print the reports out. Individual tests can be recalled for auditing purposes. The QT Insite Software provides a clean and intuitive means for creating or modifying up to 999 electrical safety test sequences which includes AC and/or DC voltage withstand, insulation resistance, and ground bond testing. For users in the medical, automotive, aerospace, and manufacturing industries, the QT Insite Software expands upon the capabilities of the user's instrument in order to provide fast and accurate test results for ensured system safety and reliability.

More Information