Vitrek V73-230V
AC/DC/IR Hipot Tester with Continuity, 5 kV AC/DC/IR, 230V Line Input
Vitrek V73-230V
AC/DC/IR Hipot Tester with Continuity, 5 kV AC/DC/IR, 230V Line Input
The Vitrek V73-230V AC/DC/IR Hipot Tester and 5kVAC/DC/IR Electrical Safety Tester with Continuity/230V Line Input offers an easy-to-use color touch user interface and an efficient, fan-free design. Digital Signal Processing (DSP) technology offers improved speed. This unit includes USB, RS232, and Digital I/O interfaces.
- Memory stores up to 999 steps/60 test sequences
- 230V Line Input Model
- 4.3 in. Color Touch Display
- Intuitive User Interface
- Line Input Voltage: 230VAC, 50-60Hz
- 5KV AC/DC Electrical Safety tester with continuity
- AC Hipot test:
- 10 to 5000V RMS, 50/60 Hz
- Accuracy : 1% of setting +5V, No load to full load
- Resolution : 1V at all levels
- Max load current : 20mArms
- DC Hipot:
- Output Voltage 20 to 5000V
- Accuracy : 1% of setting+ 5V, No load to full load
- Resolution : 1V at all levels
- Max load current : 10mA
- Low Resistance test:
- Resistance Range: 0ohm to 60Kohm
- Accuracy : 1.5%+0.015Ω (<13Ω), 3%+1ohm(<1KΩ), 5%(<13KΩ)
- Resolution : Down to 0.001Ω
- Min test time: 60 mS
- IR - Insulation Resistance:
- Test Voltage 20 to 5000VDC
- Accuracy : 2.5% of setting +5V, No load to full load
- Resolution : 1V at all levels
- Max Charge Current: 5mA automatic
- Max Capacitive Load: 2uF
- 4.3 in. Color Touch Display
- Intuitive User Interface
- Internal Self Test Fully Exercises Output and Verifies Current Accuracy
- 20mA max source current
- 100 nano-Amp Leakage Current Resolution
- 2 Year Calibration Interval
- USB 2.0, Serial/RS232, Digital I/O Interfaces
- Continuously Variable Insulation Resistance 20-5000V, 450GΩ Max
- Multi Mode IR with Steady/Rising Pass Mode
- Test Memory Stores up to 999 Steps and 60 Test Sequences
- 150μS Safety Shutdown
- Meets UL, CSA, IEC Safety Tester Requirements, CE Safety Mark Certified to EN61010
The Vitrek V73-230V Hipot Tester with Continuity, 5 kV AC offers an easy-to-use color touch user interface and an ultra-reliable, efficient, fan-free design. Digital Signal Processing (DSP) technology offers improved speed.
The V73230V is factory set to 230V. Test options for this model are AC/DC Hipot, Low Resistance tests and Isulation resistance tests. Test completion triggers are End on Time: Determination on final reading, End on Pass: Test ends with PASS for any reading within limits, End on Fail: Test ends with FAIL for any reading outside limits, and End on Steady: Test ends with PASS for a steady/rising reading within limits.
Front Panel Features
- 4.3 in. Color Touch Display
- Large, Bright LED Caution Testing Indicator
- Safety Locked HV Terminal for Hipot and IR
- Independent LED Pass/Fail Indicators
- Convenient Front Panel Power Switch
- Ultra-High Reliability Start/Stop Switches
Rear Panel Features
- Digital I/O with Safety Interlock
- Controls up to 4 HV Scanners
- USB 2.0 High Speed Universal Serial Port
- RS232 Serial Port with Selectable baud rate up to 115Kbaud
- Rugged V73 with Drop Resistant Duty Silicone Bumper
Country of Origin | United States |
---|---|
Brand | Vitrek |
Condition | NEW |
Vendor Alias | V73-230V |
- 1 - TL-209 Test Lead Set
- 1 - Power Cord
- 1 - NIST Traceable calibration certificate without data