Vitrek V74
Hipot Tester with Continuity, 5 kV AC/DC/IR/GB
The Vitrek V74 AC/DC/IR/GB Hipot Tester and 5kVAC/DC/IR/GB/30A GB Electrical Safety Tester with Continuity offers an easy-to-use color touch user interface and an ultra-reliable, efficient, fan-free design. Digital Signal Processing (DSP) technology offers improved speed. This unit includes USB, RS232, and Digital I/O interfaces.
- Memory stores up to 999 steps/60 test sequences
- 4.3 in. Color Touch Display
- Intuitive User Interface
- 5KVAC Electrical Safety tester with continuity
- AC Hipot test:
- 10 to 5000V RMS, 50/60 Hz (2500V max on V76)
- Accuracy: 1% of setting +5V, No load to full load
- Resolution: 1V at all levels
- Max load current: 20mArms
- DC Hipot test:
- 20 to 5000V
- Accuracy: 1% of setting+ 5V, No load to full load
- Resolution: 1V at all levels
- Max load current: 10mA
- Insulation Resistance Test:
- Test Voltage: 20 to 5000VDC
- Accuracy : 2.5% of setting +5V, No load to full load
- Resolution : 1V at all levels
- Max Charge Current: 5mA automatic
- Max Capacitive Load: 2uF
- Resistance
- Max IR: 450Gigohm (90MΩ per volt)
- Min IR: 150KΩ
- Accuracy : 2% (rdg <5% of max IR), 5%(< 15% of max IR), 10% (< 30% of max IR),
- 20% (above 30% of max IR)
- Max Resolution : 0.1% of value
- Min/Max Limits : Defined for each step, max
- may be set to none
- Ground Bond
- Test Current: 1 to 30Arms (42A peak), 50/60Hz
- Accuracy : 2.5%+10mA
- Resolution : settable to 0.01A at all levels
- Compliance: > 4.5Vrms (6V pk) for all currents
- Resistance
- Max Resistance: Up to compliance V limit at defined test current (4.5ohms max)
- Min/Max Limits : Defined for each step, min may be set to none
- Accuracy : 2.5%+3mΩ (<2A), 2mΩ (<6.5A), 1mΩ (otherwise)
- Resolution : 0.1mΩ (>6.5A), 1mΩ (otherwise)
- Low Resistance test:
- Resistance Range: 0ohm to 60Kohm
- Accuracy: 1.5%+0.015Ω (<13Ω), 3%+1ohm(<1KΩ), 5%(<13KΩ)
- Resolution: Down to 0.001Ω
- Min test time: 60 mS
- 4.3 in. Color Touch Display
- Intuitive User Interface
- Internal Self Test Fully Exercises Output and Verifies Current Accuracy
- 20mA max source current
- Ground Bond 1-30A RMS (42 A peak), 100µΩ Resolution
- 100 nano-Amp Leakage Current Resolution
- 2 Year Calibration Interval
- USB 2.0, Serial/RS232, Digital I/O Interfaces
- Continuously Variable Insulation Resistance 20-5000V, 450GΩ Max
- Multi Mode IR with Steady/Rising Pass Mode
- Test Memory Stores up to 999 Steps and 60 Test Sequences
- 150μS Safety Shutdown
- Meets UL, CSA, IEC Safety Tester Requirements, CE Safety Mark Certified to EN61010
The Vitrek V74 Hipot Tester with Continuity, 5 kV AC/DC/IR/GB offers an easy-to-use color touch user interface and an ultra-reliable, efficient, fan-free design. Digital Signal Processing (DSP) technology offers improved speed. The V74 includes USB, RS232, and Digital I/O interfaces.
Test options for this model are AC Hipot, DC Hipot, IR, Ground Bond, and Low Resistance tests. Test completion triggers are End on Time: Determination on final reading, End on Pass: Test ends with PASS for any reading within limits, End on Fail: Test ends with FAIL for any reading outside limits, and End on Steady: Test ends with PASS for a steady/rising reading within limits.
Front Panel Features
- 4.3 in. Color Touch Display
- Large, Bright LED Caution Testing Indicator
- Safety Locked HV Terminal for Hipot and IR
- Low Profile High Current Binding Posts for Ground Bond
- Independent LED Pass/Fail Indicators
- Convenient Front Panel Power Switch
- Ultra-High Reliability Start/Stop Switches
Rear Panel Features
- Digital I/O with Safety Interlock
- Controls up to 4 HV Scanners
- USB 2.0 High Speed Universal Serial Port
- RS232 Serial Port with Selectable baud rate up to 115Kbaud
- Rugged V74 with Drop Resistant Duty Silicone Bumper
Country of Origin | United States |
---|---|
Brand | Vitrek |
Condition | NEW |
Vendor Alias | V74 |
- 1 - TL-209 Test Lead Set
- 1 - Power Cord
- 1 - K2R Ground Bond Lead Set
- 1 - NIST Traceable calibration certificate without data