Vitrek V76

Our Part No. V76

Mfr. Model V76

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Vitrek V76

Our Part No. V76

Mfr. Model V76

The Vitrek V76 AC/DC/IR Scanning Hipot Tester and 2500VAC/2750DC/IR Electrical Safety Tester with Continuity features built-in switching for up to 8 channels of HV, 8 channels of return, and 8 channels of continuity. The color touchscreen LCD and high speed DSP technology allow for this compact unit to provide high levels of speed, accuracy, and reliability.

Memory stores up to 999 steps
4.3 in. Color Touch Display
Intuitive User Interface

Datasheet

$3,455.95 Price $3,686.00

This item ships FREE

Request a Quote

Key Features

2500VAC/2750VDC/IR/Continuity
AC/DC/IR Scanning Hipot Tester with continuity
Built-in switching for up to 8 channels of HV, 8 channels of return, and 8 channels of continuity
AC Hipot test:
- 2500V max, 50/60 Hz
- Accuracy : 1% of setting +5V, No load to full load
- Resolution : 1V at all levels
- Max load current : 20mArms (10mArms max resistive for >10sec), reduced by 20µA per V below 1000V, reduced by 10µA per V above 4000V
DC Hipot:
- Accuracy : 1% of setting+ 5V, No load to full load
- Resolution : 1V at all levels
- Max load current :
Low Resistance test:
- Resistance Range: 0ohm to 60Kohm
- Accuracy : 1.5%+0.015Ω (<13Ω), 3%+1ohm(<1KΩ), 5%(<13KΩ)
- Resolution : Down to 0.001Ω
- Min test time: 60 mS
IR - Insulation Resistance:
- Test Voltage 20 to 5000VDC
- Accuracy : 2.5% of setting +5V, No load to full load
- Resolution : 1V at all levels
- Max Charge Current: 5mA automatic
- Max Capacitive Load: 2uF
Ground Bond:
- Test Current 1 to 30Arms (42A peak), 50/60Hz
- Accuracy : 2.5%+10mA
- Resolution : settable to 0.01A at all levels
- Compliance: > 4.5Vrms (6V pk) for all currents
4.3 in. Color Touch Display
Intuitive User Interface
Internal Self Test Fully Exercises Output and Verifies Current Accuracy
20mA max source current
100 nano-Amp Leakage Current Resolution
2 Year Calibration Interval
USB 2.0, Serial/RS232, Digital I/O Interfaces
Continuously Variable Insulation Resistance 20-5000V, 450GΩ Max
Multi Mode IR with Steady/Rising Pass Mode
Test Memory Stores up to 999 Steps and 60 Test Sequences
150μS Safety Shutdown
Meets UL, CSA, IEC Safety Tester Requirements, CE Safety Mark Certified to EN61010

Details

The Vitrek V76 Hipot tester features a color touch LCD and high speed DSP technology. The compact and rugged V76 sets the standard for price/performance ratio. Made in the USA to meet tough UL, CSA, TUV and IEC Hipot requirements - the V76 provides unbeatable speed, accuracy, user safety and reliability.

The V76 offers AC & DC Hipot to 5KV, leakage current measurement to 100 nano-amps, Insulation Resistance to 450GΩ and built-in switching. Combine all that with USB, RS232 and Digital I/O interfaces, plus a 2 year warranty.

Test 8 DUTs at a Time with the V76

For multi-channel hipot testing-choose the V76 with 24 channels of built-in high voltage switching. With the versatile V76, you can test hipot or IR for any combination of up to eight test points and you can measure low resistance (from .001 ohm to 60K ohms) on up to eight conductors. All automatically with a single touch and all from a single compact tester. For requirements exceeding eight points, the V76 can control up to four Vitrek 964i 64 channel HV Switching Systems- providing up to 256 channels of Hipot test capability.

Expanded Capabilities via QT Insite Test Automation Software

For users looking to manage their testing and improve throughput, safety, and quality, the QT Insite Test Automation Software License is available for separate purchase.

The QT Insite Software enables users to automatically initiate tests, then collect and store the results data. Test results can be tracked by part number and changes in performance can be shown by lot number. Barcode scanning allows users to recall the ready-to-run sequence of a specific DUT and multiple DUT numbers can be linked to a given sequence. With this software, the results of every test are recorded. Test results can be easily recalled and saved in the format of .pdf or .csv for quick reference along with the ability to print the reports out. Individual tests can be recalled for auditing purposes. The QT Insite Software provides a clean and intuitive means for creating or modifying up to 999 electrical safety test sequences which includes AC and/or DC voltage withstand, insulation resistance, and ground bond testing. For users in the medical, automotive, aerospace, and manufacturing industries, the QT Insite Software expands upon the capabilities of the user's instrument in order to provide fast and accurate test results for ensured system safety and reliability.

More Information