Weller WHA3000P

Our Part No. WHA3000P

Mfr. Model WHA3000P

Catalog No. WHA3000P

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Weller WHA3000P

Our Part No. WHA3000P

Mfr. Model WHA3000P

Catalog No. WHA3000P

The Weller WHA3000P Digital Hot Air Station with Built-In Turbine is suitable for difficult repairs on circuit boards with fine pitch surface mounted components. A thorough design concept combines maximum process safety with ease of use and technically advanced application solutions.

Self-contained benchtop unit features powerful internal air source for maximum portability
700 W of power allow work on larger dual in-line and quadpack components
ESD Safe

$3,247.95 Price $4,060.00

This item ships FREE

Key Features

Self-contained benchtop unit features powerful internal air source for maximum portability
Suitable for demanding repair tasks involving complex fine pitch surface mounted components
700 watts of power allow work on larger dual in-line and quadpack components
Set and read temperatures are digitally displayed on bright, clear LCD
Temperature and air flow are independently controlled
Controlled output maintains set temperature regardless of air flow setting
Memory stores up to 10 thermal profiles to ensure process repeatability
Special ionizing circuit assures hot air is static-free to protect sensitive components
Compatible with optional Type K thermocouple to measure temperature on specific areas of PCBs
Foot switch includes three positions: Off, Hot Air, Vacuum
Hot air iron features vacuum pickup for easy component removal

Specifications

Power Consumption: 700W
Input Voltage: 230 V
Output Voltage: 120 V
Temperature Range: 122°F to 1022°F (50°C to 550°C)
Temperature Accuracy: +/- 86°F (+/- 30°C)
Pump Type: Rotary Vane
Vacuum Pressure: - 0.6 Bar
Air Flow Volume: 5 to 50 l/min.
Dimensions: 9.5 x 10.6 x 6.7 in. (240 x 270 x 170 mm)
ESD Safe

Details

The hot air temperature at the hand-piece can be adjusted over the range of 50°C to 550°C (122°F to 1022°F). The air flow rate is generated via an internal turbine and can be adjusted between the range of 5 l/min to 50 l/min. Hot air temperature and air flow rate are digitally controlled.

The vacuum necessary for lifting the component is integrated into the nozzle system and can be activated to suit the operating mode chosen. Two operating modes are provided:

1) The Manual operating mode can be used for manual work at the hot air temperature and air flow rate set. Hot air and vacuum can be activated using the foot switch, manual remote control console or directly on the control Panel.

2) The Automatic operating mode establishes a program with a 3-step time/temperature profile, and can be used in conjunction with the WHP3000 Pre-Heat Plate available as an accessory.

The parameters for hot air temperature, air flow rate, temperature of the optional WHP3000 Pre-Heat Plate and vacuum function can be adjusted separately and can be saved as a Rework Profile for the specific application.

The repair station can also be complemented with the optional matched WBH3000S Circuit Board Holder for X-Y alignment and a stand with Z-axis guide for the hot air hand-piece.

More Information