Yokogawa CA71
Portable Multi-functional Calibrator
CA71
CA71
The Yokogawa CA71 Portable Multi-functional Calibrator measures voltage, current, resistance, TC, RTD, frequency, and pulse signals. It has rotary switches for simple handling. Just open the carrying case, connect the cables, and take measurements.
- Functions: Divided output (n/m), Auto-step, Sweep, Memory and Communication
- Generate voltage/current up to 30 V DC/24 mA DC and measure up to 100 V DC/100 mA DC
- Built-in reference junction compensation sensor
- Source and measure operations can be performed simultaneously
- Source signal and measurement signal options: voltage, current, resistance, thermocouple (TC), resistance temperature detector (RTD), frequency, pulse
- AC voltages, including supply voltage, can be measured
- Includes wide array of additional functions
- Easy operation
- Compact and lightweight
- Auto-Step Output Function: n value sent automatically when n/m function selection is selected (two options: approximately 2.5 seconds/step or approximately 5 seconds/step)
- Sweep Functions: Sweep time (two options: approximately 16 seconds or approximately 32 seconds)
- Memory Function: 50 value sets (generated and measured values are stored as value sets with the same address (up to 50 value sets can be stored))
- Measuring Unit Maximum Input: Voltage terminal: 300 VAC Current terminal: 120 mA DC
- Current Terminal Input Protection: Fuses: 125 mA/250 V
- Measuring Unit Ground Voltage: Maximum 300 VAC
- Measurement Display Updating Rate: Approximately once per second
- Serial Interface: Enabled when communication cable (RS232) is connected (sold separately)
- Display Segmented: LCD (Approx. 76 mm × 48 mm)
- Backlight: LED backlight; auto-off after one minute (from when LIGHT key is turned on)
- Power Supply: Four AA alkaline batteries, or special AC adapter (sold separately)
- Auto-Power-Off Function: Approx. 10 minutes (auto-power-off can be disabled through a DIP switch setting)
- Applicable Standard: EN55011: 1998, Class B, Group 1; EN61326-1: 1997 + A1: 1998; IEC61010-1, IEC61010-2-31
- Insulation Resistance: Across input terminal and output terminal, 500 V DC, 50 MO or greater
- Withstand Voltage: Across input terminal and output terminal, 3.7 kVAC, for one minute
- Operating Temperature And Humidity Ranges: 0 - 50°C, 20 - 80% RH (no condensation)
The Yokogawa CA71 Portable Multi-functional Calibrator is small, lightweight, and can simultaneously source and measure voltage, current, resistance, TC, RTD, frequency, and pulse signals. The Handy Calibrator incorporates rotary switches for simple handling. Just open the carrying case cover and connect the cables, and you're ready to take measurements.
Brand | Yokogawa |
---|---|
Condition | NEW |
Vendor Alias | CA71/TE |
- 1 - Set of Signal Generating Lead Cables (Red x 1, Black x 2), 98020
- 1 - Set of Measurement Lead Cables (Red and Black), RD031
- 1 - Carrying Case, 93016
- 1 - Terminal Adapter, 99021
- 1 - Fuse, 99040
- 4 - AA Alkaline Batteries
- 1 - User Manual
Customers Also Bought