Yokogawa CL150
Clamp-on Tester, ACA, ACV, DCV, OHM, 2000 A
CL150
CL150
The Yokogawa CL150 Clamp-on Tester is for measurement of AC Current, AC Voltage, DC Voltage, Resistance, and DC Output. It has a mean value display, DC output function, data hold function, and sleep function. It has a digital, 4000-count LCD display with a response time of 2 seconds.
- Diameter of Measurable Conductor: 54mm
- Approved for CAT III 600 V, CAT II 1000 V
- Circuit Voltage: 1000Vrms or less
- Withstanding Voltage: 5.55kV AC for one minute
- AC current measurement with current ranges up to 2000A
- AC/DC voltage and resistance measurements
- 54mm in diameter of measurable conductor
- Mean value display
- DC output function
- Data hold function
- Sleep function
- Approved for conformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. m 600 V, CAT. II1000 V)
- Display (LCD, Digital Counts): 3999
- AC Current Accuracy (400A Reference): 1.0+3(50/60Hz); 2.0+3(40~1kHz)
- AC Current Accuracy (2000A Reference, 0~1500A): 1.0+3(50/60Hz); 3.0+3(40~1kHz)
- AC Voltage Accuracy (40/400V/750V Reference): 1.0+2(50/60Hz); 1.5+3(40~1kHz)
- DC Voltage Accuracy (40/400V/1000V Reference): 1.0+2
- Resistance Accuracy (400/4k/40k/400kΩ reference): 1.5+2, Beeps at below 50± 35Ω (continuity check)
- DC Output Accuracy (400A, 0~400mV Reference): .5۫% rdg ± 0.5mV (50/60Hz); .5% rdg ± 0.5mV (40~1kHz)
- Method of detection: Mean Value
- Response Time: Approx. 2 seconds
- Range Switching: Manual-range (on AC current range) / Auto-range (on AC voltage range, resistance range)
- Data hold: On all range
- Operating temperature and humidity: 0-40°C, 85% RH or less (no condensation)
- Influence of external magnetic field: 1A or less at 400A/m
- Influence of conductor position: ± (2% rdg + 3dgt) or less
- Circuit voltage: 1000Vrms or less
- Withstanding voltage: 5.55kV AC for one minute
- Power Supply: R6P (SUM-3) x2 or LR6 x2
Brand | Yokogawa |
---|---|
Condition | NEW |
Vendor Alias | CL150 |
|