Yokogawa CL345
True-RMS Clamp-on Tester, Leakage Current, 400 A
CL345
CL345
The Yokogawa CL345 True-RMS Clamp-on Tester is for leakage current measurement from 40mA to 400A. It has True-RMS display, data hold, auto power-off, and manual range switching. It has a 4200-count LCD display and a response time of approximately 2 seconds.
- Diameter of Measurable Conductor: 40mm
- Approved for CAT III 300 V
- Method of Detection: True-RMS
- Circuit Voltage: 300 Vrms or less
- Withstanding Voltage: 3.7 kV AC for one minute
- Leakage current measurement with current range from 40mA to 400A
- Manual range switching and auto power-off functions
- 40mm in diameter of measurable conductor
- True-RMS display
- Auto power-off
- Manual range switching
- Approved for conformity to safety standards EN61010-2-032 (CAT. III 300 V)
- Method of detection: True-RMS
- Display: LCD (Digital display: 4200 counts)
- Response Time: Approx. 2 second
- Range Switching Manual-range
- Data hold: On all range
- Operating temperature and humidity: 0 - 40°C, 85% RH or less (no condensation)
- Influence of external magnetic field: 10 mA or less in proximity to a 15 mm-dia conductor carrying 100A
- Influence of conductor position: 40/400 mA range: Within 5 dgt at every part inside the jaw 400A range, 0 to 250A: Within ±0.5% rdg ±5 dgt at every part inside the jaw section
- Influence of Residual Current: 12 mA or less in proximity to a 10 mm-dia conductor carrying 100A
- Circuit voltage: 300 Vrms or less
- Withstanding voltage: 3.7 kV AC for one minute
- Power Supply: LR03 x 2; R0-3 (UM-4) x 2
Brand | Yokogawa |
---|---|
Condition | NEW |
Vendor Alias | CL345 |
|