The A&D Weighing RA3100 Omniace RA3100 Data Acquisition System is for research, development, and field maintenance. It enables accurate and long-term measurement of high-speed switching waveforms, even in severely noisy environments, in electric automobiles, electronic appliances, railroad cars, and solar power generation systems utilizing inverter control technology. 9 modules can be installed in the main unit, allowing for 18-channel high-speed memory recording. Various modules for high-speed voltage, high-accuracy voltage, logic input, temperature measurement, and remote control are available.

Excellent Visibility and Operability

The LCD display with touch panel allows zoom in and out, and scrolling through the waveform simply, allowing a dynamic waveform drawing and operability like a smartphone. Pinch in to zoom out, pinch out to zoom in, and swipe to scroll.

Various Recording Methods

"Memory", "SSD", and "Printer" are provided as data recording destinations. Data recording can be performed at three destinations at the same time. This can be selected freely depending on the measurement purposes. All data can be measured simultaneously. Memory mode records data in the internal memory (4GB) at high speed (Max: 20MS/s). In addition, measurement can be performed under a variety of conditions using a variety of trigger functions. After the input data is recorded in the memory, it is automatically saved to SSD. Long-term data can be recorded to the internal SSD. High-speed recording of up to 1MS/s is possible when using 36 channels. Since it is stored as digital data, data can be analyzed after recording and data can be managed for a long period of time. Input data is saved directly to SSD.

Various Monitor Displays

Input signal and recorded data can be displayed as Y-T waveform display, X-Y display, and FFT. Set the signal display width and display position. Signals can be drawn at any position on the graph at any width.You can easily draw a 100V signal in the width of 1div.

X-Y Waveform Display

An X-Y waveform can be drawn by specifying 4 channels for the X-axis and 4 channels for the Y-axis. The screen format can be displayed a large single screen format, or divided four screen formats for the each X and Y axis channels. The pen can also be moved up or down, and the grid can be turned on or off.

FFT Analysis

FFT analysis is performed for any two signals. The top 10 highest values can be read from the analysis results, and the value of any analysis result can be read using the cursor. (FFT analysis can be performed on normal data recorded in SSD.)

Y-T Waveform Display

Display the measurement channels split into three sheets. Up to 48 channels of signals can be monitored on a sheet with 20 vertical/horizontal divisions. Graphs can be divided into 1 to 18 sheets and displayed.

Recording Mode Selection

Nine measurement patterns are prepared as Recording modes. "Recording Mode" can be selected from Measurement starts by manual operation. Measurement starts from a trigger signal or Repeating measurement, etc. When "Recording Mode" is selected, the necessary set-up menu is displayed and can be easily set. The nine modes include 1) Normal Record, 2) Start Time, 3) Start Trigger, 4) Interval time (N times), 5) Start Time + Start Trigger, 6) Start Time + Interval Time (N times), 7) Start Trigger + Interval Time (N times), 8) Start Time + Start Trigger + Interval Time (N times), and 9) Window Recording.

PC Compatibility

The RA3100 can be remotely operated from a web browser (operating PC). The web browser displays the same screen as the RA3100 main unit with pseudo operation panel keys (START key, etc.) to make settings and start/stop recording. Additionally, data stored on the RA3100 can be transferred to a PC. The RA3100 Viewer is software to display recorded data exported to external media from an RA3100 on a PC. The "File Converter" software can convert recorded data exported to external media from an RA3100 to CSV or ASAM MDF (Ver. 4.1) files on a PC.

High-Speed, High-Definition Recording

High-speed (100mm/s) and high-definition (80dots/mm at 25mm/s) recording is possible. The maximum number of signals that can be recorded simultaneously is 48. In addition to signals, the recording name, measurement start time, trigger mark, recording speed, etc., can be printed. Users can freely change the number of graphs to record, the width of each graph (2.5mm to 215mm), and the space between graphs. In addition, the position and amplitude of the event signal can be changed every 8 channels.