Additel ADT912A-M

Low Pressure Pneumatic Test Pump, 60 psi, M20X1.5 (F) - Air

ADT912AM
ADT912A-M

Additel ADT912A-M

Low Pressure Pneumatic Test Pump, 60 psi, M20X1.5 (F) - Air

ADT912AM
ADT912A-M
  • Brand Name: Additel
  • Condition: NEW
This product is available for shipping to the US, Canada, and Puerto Rico only.
$2,002.00
This item ships FREE
  • Generated pressure range: 95% vacuum to 60 psi (4 bar) positive pressure
  • Portable: Only 6.2 lb (2.8 kg)
  • Adjustment resolution: 0.1 Pa (0.001 mbar)
  • High-quality screw press for fine pressure adjustment
  • Isothermal chamber: Pressure chamber is insulated to reduce influence from environmental temperature changes
  • Specially designed bellows minimize leakage to guarantee excellent stability
  • Shut-off valve closes air in isothermal chamber during calibration
  • Built-in gas-liquid isolator protects pump from moisture and dirt
  • Hand-tight quick connectors allow easy connecting and disconnecting to test pump without need for PTFE tape or wrenches
  • Media: Air
  • Material:
    • Ram/adapters: SS
    • Body: SS, aluminum
    • Seals: Buna-N, PTFE, Copper Alloy
  • Pressure port type: M20X1.5 female
  • Piston volume: 21 ml (1.3 in3)
  • Height: 5.51 in. (140 mm)
  • Base: 10.75 in. (273 mm) x 10.16 in. (258 mm)
  • Warranty: 1 year

The Additel ADT912AM Low Pressure Test Pump, 60 psi, M20X1.5 (F) - Air is a hand operated pressure pump designed to generate pressure from 95% vacuum to 60 psi (4 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 0.1 Pa (0.001 mbar). The ADT912A-M is a very stable low pressure calibrator. It makes use of an isothermal bellows chamber which is designed for reducing the possible effects of environmental temperature change. Most pumps make use of a check valve (non-returning valve) and are not well insulated which will cause large fluctuations in pressure with a change in ambient temperature or when the unit is touched. The ADT912A-M does not use a check valve and is remarkably stable. Two hand-tight connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The ADT912A-M is an ideal comparison test pump for low pressure application.

More Information
BrandAdditel
ConditionNEW
Vendor AliasADT912A-M
  • 20 - O-rings
  • 1 - Manual