AEMC 3000-24-1-1-BNC

MiniFlex AC Current Probe with 24 in. Flexible Sensor, 3000A, 1mv/A, 10 ft. BNC Output

30002411BNC
3000-24-1-1-BNC

AEMC 3000-24-1-1-BNC

MiniFlex AC Current Probe with 24 in. Flexible Sensor, 3000A, 1mv/A, 10 ft. BNC Output

30002411BNC
3000-24-1-1-BNC
  • 24 in. Flexible sensor with 10 ft. BNC output
  • Measures from 0.5Arms to 3000Arms
  • Accuracy 1% of Reading +- 0.25A
$489.25 Price $515.00
This item ships FREE
In stock: 1 Units
  • 24 in. Flexible sensor with 10 ft. BNC output
  • Measures from 0.5Arms to 3000Arms
  • Accuracy 1% of Reading +- 0.25A
  • TRMS measurements when connected to TRMS instrument
  • No core saturation or damage if overloaded
  • Overrange LED indication
  • EN 61010; 1000V CAT III; 600V CAT IV; CE Mark
  • 9V Battery for typical 140 hours continuous operation
  • 20kHz frequency response
  • Low phase shift for power measurements
  • Insensitive to DC, measures only AC component on DC + AC signals
  • Excellent linearity
  • Lightweight
  • Sensor is resistant to oils and aliphatic hydrocarbons

The AEMC MF 3000-24-1-1 (#2132.63) MiniFlex AC Current Probe with 24 in. Flexible Sensor, 3000A, 1mv/A, 10 ft. BNC Output is a compact flexible AC current transformer composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes could not be used. In particular, it can be installed in confined spaces, places where access is difficult, or even wrapped around irregular shapes.

The MF30002411 MiniFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by overloads. The sensor assembly is insulated for 1000V CAT III; 600V CAT IV. The MiniFlex meets EN 61010 and is CE marked. It has an mV output proportional to the current measured for direct readings on DMMs, data loggers, oscilloscopes, and power or harmonic meters. TRMS measurements are taken when connected to a TRMS meter. The MF 3000-24-1-1 is insensitive to DC currents and only the AC component of the measured signal is measured.

More Information
Country of OriginUnited States
BrandAEMC
ConditionNEW
  • 1 - MF 3000-24-1-1 MiniFlex
  • 1 - User Manual