AEMC 5050
Digital/Analog Megohmmeter with 4 kB Memory/20 Readings, 5000V, 10 TOhms
AEMC 5050
Digital/Analog Megohmmeter with 4 kB Memory/20 Readings, 5000V, 10 TOhms
The AEMC 5050 (2130.20) Digital/Analog Megohmmeter offers automatic calculation and presentation of the Dielectric Absorption Ratio (DAR), Polarization Index (PI), and Dielectric Discharge (DD). Test voltage, insulation resistance, and leakage current during tests are displayed.
- Test voltage combinations of 500/1000/2500/5000V
- Insulation measurements from 1 kOhm to 10 TOhms
- Storage of Readings: 4 kB memory
- Storage of Test Results: 20 readings
- True Megohmmeter
- Test voltage combinations of 500V, 1000V, 2500V, 5000V
- Insulation measurements from 1 kOhm to 10 TOhms
- Adjustable/programmable test voltage from 40 to 5100V
- Automatic calculation of DAR, PI, DD ratios
- Direct measurement/display of capacitance/leakage current
- Displays resistance, test voltage, run time
- Programmable test run times/PI ratio times
- Smooth/Alarm functions
- Automatic test inhibition
- Programmable test voltage lock-out
- Programmable alarm setting
- Automatic discharge/display of discharge voltage
- Large dual-display with time, voltage, measurements shown
- Bright blue electroluminescent backlight
- Auto power-down when not in use
- AC/DC powered with rechargeable NiMH batteries
- Rugged dual-wall weatherproof field case
- Designed/built to IEC safety standards
- EN 61010-1, 600V, CAT III
- Test insulation on cables, transformers, motors, generators, insulators, wiring installations
- High resistance/absorption tests
- Spot reading tests
- Timed resistance measurements
- Dielectric Absorption Ratio (DAR)/Polarization Index (PI) tests
- Multi-layer insulation testing (Dielectric Discharge)
- Test old/water damaged installations over long time runs
- Motor insulation resistance measurements
- Programmable alarm settings
- Predictive maintenance by storing results in PC for trend analysis
- User selectable voltage testing to provide application specific testing
- Test Voltage (500V): 10 kOhms to 2 TOhms
- Test Voltage (1000V): 10 kOhms to 4 TOhms
- Test Voltage (2500V): 10 kOhms to 10 TOhms
- Test Voltage (5000V): 10 kOhms to 10 TOhms
- User Selectable Test Voltage: Programmable, 10V increments (40 to 1000V), 100V increments (1000 to 5100V)
- Storage of Readings over Time: 4 kB memory
- Storage of Test Results: 20 readings
The AEMC 5050 (2130.20) Digital/Analog Megohmmeter is ideal for large motors, generators, transformers, and more. Comprehensive testing can be performed with the AC or battery powered options, measurement range of both gigaohms and teraohms, and multifunction capability. The features and functions incorporated in this product family are the results of many years of analyzing how megohmmeters are used in everyday applications.
Advanced technology has been applied to automate and facilitate the testing process for these applications. Many features incorporated in the AEMC 5050 (2130.20) Digital/Analog Megohmmeter include automatic calculation and presentation of the Dielectric Absorption Ratio (DAR), Polarization Index (PI), and Dielectric Discharge (DD). The PI ratio times are also user-defined. This unit displays the test voltage, insulation resistance, and the leakage current during the test. Capacitance of the sample and discharge voltage present at the test leads are displayed at the conclusion of the test.
This megohmmeter is designed with the highest level of safety features built in. The unit incorporates test inhibit capabilities which will not allow test voltages to be generated if a live sample is detected. The test terminals are recessed to ensure operating safety. The test leads, rated for 5000 volts for both testing and measurement, are the only truly safety approved 5000 volt leads. The AEMC 5050 (2130.20) Digital/Analog Megohmmeter can be operated from an internal rechargeable battery or from AC line power.
Country of Origin | France |
---|---|
Brand | AEMC |
Catalog | 2130.20 |
Condition | NEW |
UPC | 685338150162 |
Vendor Alias | 2130.20 |
- 1 - Digital/Analog Megohmmeter (5050)
- 1 - Safety Lead with Clip, Red, 10 ft.
- 1 - Safety Lead with Clip, Blue, 10 ft.
- 1 - Safety Lead with Clip, Black, 10 ft.
- 1 - Guard Terminal Jumper Lead, Blue (2151.31)
- 1 - Tool Bag (2133.73)
- 1 - Power Cord, US Plug, 115V (5000.14)
- 1 - Rechargeable Battery Pack, 9.6V (2960.21)
- 1 - User Manual