AEMC DSG-8

Our Part No. 600009

Mfr. Model DSG-8

Skip to the end of the images gallery

Skip to the beginning of the images gallery

AEMC DSG-8

Our Part No. 600009

Mfr. Model DSG-8

The AEMC DSG-8 (6000.09) 8-Channel AC Digital Signal Generator simulates waveforms for the PowerPad/PowerPad III Series Analyzers or PEL 100 Series Data Loggers. The DSG-8 can create simulations for any AC distribution system supported by these instruments, including capturing transients, inrush, and alarm events.

Comes standard with 7x preset simulations
Simulator software allows for modifying preset simulations or creating/saving/loading new waveform simulations

Please call

Key Features

Simulates waveforms for PowerPad/PowerPad III Series Analyzers and PEL 100 Series Data Loggers
Creates simulations for any AC distribution system supported by compatible instruments
Enables simulations for capturing transients, inrush, and alarm events
Comes standard with 7x preset simulations
Simulator software enables modifying of preset simulations or creating, saving, and loading new waveform simulations
Presets can be selected from PC running simulator software or through instrument's front panel
Powered by USB connection or 3x C-cell alkaline batteries

Specifications

Number of Channels: 8
Output Termination: 5x 4 mm safety banana connectors, 4x AEMC/C.A. connectors
Output Voltage: 0 to 55Vrms (Earth/Ground to phase 1/2/3 and neutral), 0 to 1Vrms (AEMC/C.A. connector)
Frequency Range: 45 to 65 Hz
Sample Rate: 128 samples/cycle
Harmonics: Programmable harmonic content to 50th harmonic
Inrush: 14-cycle inrush simulation
Presets: 7x preset waveforms (6x normal/transient, 1x normal/inrush)
Communication: USB 2.0
Power Consumption: 70 mA at max. output across all 8x channels
Power Source: USB 5V, 3x 1.5V C-cell alkaline batteries
Battery Life: 100 hours active mode (output ON), 60 days sleep mode (output OFF)

Details

The AEMC DSG-8 (6000.09) 8-Channel AC Digital Signal Generator simulates waveforms for the PowerPad and PowerPad III Series Analyzers or PEL 100 Series Data Loggers. The DSG-8 can create simulations for any AC distribution system supported by these instruments, including capturing transients, inrush, and alarm events. This instrument is powered by USB connection or 3 C-cell alkaline batteries.

The simulator comes standard with 7 preset simulations which can be modified through the simulator software. Additionally with the simulator software, users can create, save, and load new waveform simulations. Presets can be selected from a computer running the simulator software or through the front panel of the DSG-8. Custom simulations are able to be configured via the simulator software.

More Information