Desco 19652
Single Workstation Continuous Monitor, Multi-Mount, with Universal Plug
19652DESCO
19652
Desco 19652
Single Workstation Continuous Monitor, Multi-Mount, with Universal Plug
19652DESCO
19652
The Desco 19652 Multi-Mount Single Workstation Continuous Monitor (Universal Plug) continuously monitors the path-to-ground integrity of one operator and ESD work-surface. The alarm sounds when the operator disconnects from the monitor. The mat monitor switch disables the work-surface monitor circuit when used in areas without ESD work-surfaces.
- Audible alarm adjustment
- Wave distortion technology
- Single-wire impedance design
- NIST calibrated
- Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
- Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and monitor's jack is intermittent
- Mat monitor switch disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
- Adjustable audible alarm: sets the audible alarm volume from loud to louder
- Wave Distortion Technology provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap's path-to-ground and the presence of its 1 megohm safety resistor
- Park Snap allows the operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm
- Single-Wire impedance design meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
- 1.2 volt operator test voltage reduces the risk of electrical overstress (EOS) for the handling of sensitive components
- <50 millisecond alarm response time identifies failures and intermittencies that inferior technologies miss
- Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs
- NIST Calibrated with Certificate Included
- 100-240VAC Power Adapter with IEC C14 Style Inlet, connects to a power cord with an IEC C13 outlet connector
The Desco 19652 Single Workstation Continuous Monitor, Multi-Mount, with Universal Plug is a single workstation continuous monitor. It continuously monitors the path-to-ground integrity of one operator and one ESD worksurface. Mounting tabs make it suitable to install in workbench or equipment settings. The 19652 is designed with Wave Distortion Technology which provides stable continuous monitoring of the path-to-ground and presence of 1 megohm resistance of an operator's wrist strap. Audio and visual alarms activate (in less than 50 milliseconds) when the operator unintentionally disconnects from the monitor or the wrist strap connection points are intermittent. The Multi-Mount Monitor also monitors for a worksurface path-to-ground of less than 10 megohms. All Multi-Mount Monitors are calibrated to NIST standards and include a certificate.
| Brand | Desco |
|---|---|
| Condition | NEW |
| Vendor Alias | 19652 |
- 1 - Mat Monitor Cord (White)
- 1 - Countersunk Washer
- 1 - Flat Head Screw, 6-32 x 1/4"
- 2 - Pan-Head Screws, #6 x 3/8"
- 1 - Dual Lock Fastener Set, 2" Length
- 1 - 10mm Interchangeable Park Snap
- 1 - 10mm Operator Jack Adapter
- 1 - Power Adapter, 24VDC, IEC Inlet
- 1 - Certificate of Calibration
Customers Also Bought
Desco 98221 Wave Distortion Monitor Verification Tester
$743.95 Price $873.86
Related Products
-
Desco 98221 Wave Distortion Monitor Verification TesterModel No. 98221Catalog No. 98221$743.95 Price $873.86Log in for member pricingThis item ships FREE
