Desco 98221
Wave Distortion Monitor Verification Tester
The Desco 98221 Wave Distortion Monitor Verification Tester allows for calibration verification in which the test limits of Desco Wave Distortion Monitors can be checked without removing them from their work stations. The extruded aluminum enclosure shields the tester from electrical interference when in-use.
- Checks test limits of Wave Distortion Monitors
- Extruded aluminum enclosure
- NIST calibrated
- Checks test limits of Desco Wave Distortion Monitors without removing them from their workstations
- Extruded aluminum enclosure shields tester from electrical interference when in-use
- Calibrated with accepted procedures and standards that are NIST traceable
- Suitable for use with:
- Mini Monitors (19239, 19242, 19243)
- Multi-Mount Monitors (19651, 19652)
- Dual Operator Continuous Monitors (19246, 19247)
- Full-Time Continuous Monitors (19325, 50543, 50544)
The Desco 98221 Wave Distortion Monitor Verification Tester is used to perform periodic test limit verification of Desco Wave Distortion Monitors. Verification may be accomplished without removing the monitor from its workstation. The Wave Distortion Monitor Verification Tester is National Institute of Standards and Technology (NIST) traceable. Frequency of verification is based on the critical nature of the ESD susceptible items handled. Desco recommends annual calibration of workstation monitors and the Wave Distortion Monitor Verification Tester.
Desco Single-Wire Wave Distortion Continuous Monitors are defined in ESD TR1.0-01-01 as impedance continuous monitors. Most metrology departments or companies specializing in calibration will not have the specialized test equipment needed for the calibration or verification of wave distortion continuous monitors. The Desco 98221 Wave Distortion Monitor Verification Tester meets ANSI/ESD S20.20 and Compliance Verification ESD TR53.
Country of Origin | United States |
---|---|
Brand | Desco |
Condition | NEW |
Vendor Alias | 98221 |
- 1 - Wave Distortion Monitor Verification Tester
- 1 - Alligator Clip (09700)
- 1 - 10mm Stacking Snap (09782)
- 1 - Ground Plug Adapter (09838)
- 1 - Banana Plug Wire Adapter, 5"
- 1 - Ground Extension Cord, 5'
- 1 - Certificate of Calibration