Desco 50904
Ion Bar Assembly with 14 Emitters, 60 in.
50904
50904
Desco 50904
Ion Bar Assembly with 14 Emitters, 60 in.
50904
50904
The Desco 50904 Ion Bar Assembly with 14 Emitters (60 in.) requires a HV controller (not included) for proper usage. This unit utilizes process ion bar technology as an alternative to overhead ionization. Particulate contamination is reduced with this unit and is an effective ESD control within a laminar flow hood or mini environment.
- Length: 60"
- Number of Emitters: 14
- Lightweight design to fit into tight spaces
- ABS plastic/aluminum construction
- 14 emitters, 60 in. long
- Non-Air Assisted
- Process ion bar technology
- Cost-effective alternative to overhead ionization
- Reduces particulate contamination
- Effective ESD control within a Laminar Flow Hood or Mini environment
- Lightweight, small, cross-sectional design allow it to fit in tight spaces
- Ion bars can be daisy-chained to connect multiple bars in sequence
- One power supply can drive up to 40 emitter tips
- Jumper can be made in lengths to fit every need
- Constructed of ABS plastic and aluminum top caps for ease of mounting
- Bars are pre-drilled with mounting brackets
- Rapid neutralization over a localized area
- Replaceable bayonet style thoriated tungsten emitters
- Controllable pulse rate
- DC ionization
- Current limited emitters
- Controllable polarity balance
- For use with an HV Controller
The Desco 50904 Ion Bar Assembly with 14 Emitters, 60 in. is a pulsed DC ionizer. The bar's emitters have alternating polarities over the length of the bar. This design results in less ion recombination than when the same emitter is used to output both polarities. The EMIT Non-Air Assisted Ion Bar System meets the ANSI/ESD S20.20 required limit of less than ± 50 volts offset voltage (balance) tested in accordance with ANSI/ESD STM3.1.
| Brand | Desco |
|---|---|
| Condition | NEW |
| Vendor Alias | 50904 |
