Desco 50922
Air Assisted Ion Bar Assembly with 12 Emitters, 36 in.
50922
50922
Desco 50922
Air Assisted Ion Bar Assembly with 12 Emitters, 36 in.
50922
50922
The Desco 50922 Air Assisted Ion Bar Assembly with 12 Emitters (36 in.) requires a HV controller (not included) for proper usage. This unit utilizes process ion bar technology as an alternative to overhead ionization. This unit reduces particulate contamination and is an effective ESD control within a laminar flow hood.
- Length: 36"
- Number of Emitters: 12
- Lightweight design to fit into tight spaces
- ABS plastic/aluminum construction
- 12 emitters, 36 in. long
- Air Assisted
- Process ion bar technology
- Cost-effective alternative to overhead ionization
- Reduces particulate contamination
- Effective ESD control within a Laminar Flow Hood or Mini environment
- Lightweight, small, cross-sectional design allow it to fit in tight spaces
- Ion bars can be daisy-chained to connect multiple bars in sequence
- One power supply can drive up to 40 emitter tips
- Jumper can be made in lengths to fit every need
- Constructed of ABS plastic and aluminum top caps for ease of mounting
- Bars are pre-drilled with mounting brackets
- Rapid neutralization over a localized area
- Replaceable bayonet style thoriated tungsten emitters
- Controllable pulse rate
- DC ionization
- Current limited emitters
- Controllable polarity balance
- For use with an HV Controller
The Desco 50922 Air Assisted Ion Bar Assembly with 12 Emitters, 36 in. is a pulsed DC ionizer. The bar's emitters have alternating polarities over the length of the bar. This design results in less ion recombination than when the same emitter is used to output both polarities. The Air Assisted Ion Bar System meets the ANSI/ESD S20.20 required limit of less than ± 50 volts offset voltage (balance) tested in accordance with ANSI/ESD STM3.1.
| Brand | Desco |
|---|---|
| Condition | NEW |
| Vendor Alias | 50922 |
