Dwyer 160S-18PM
Permanent Mount S-Type Stainless Steel Pitot Tube 18-inch Insertion Length
Dwyer 160S-18PM
Permanent Mount S-Type Stainless Steel Pitot Tube 18-inch Insertion Length
The Dwyer 160S-18PM S-Type Stainless Steel Pitot Tube measures the flow of dirty, particulate laden air or gas streams. Total and static pressure tubes are aligned and welded together every 6". The large 5/16" diameter stainless steel tubing avoids plugging. It has a 1" welded stainless steel sleeve, adjustable compression fitting, 1/8" female NPT connections and 2 barbed tubing adapters for 3/16" I.D. rubber or vinyl tubing.
- Permanent mount
- 18" insertion length
- Permanent mount
- 18 inch insertion length
- Adjust depth, locks in place
- Large 5/16 inch stainless steel tubing
- Resists plugging under harsh conditions
- 1/8 inch FNPT connections permanently welded to unit
- Tolerates up to 1500°F (815.5°C) and 100 psig (6.89 bar)
- Designed for dirty, particulate laden air
Applications:
- Monitor or control air velocity or air flow in particulate laden air streams
- Environmental Testing
The Dwyer 160S18PM S-Type Stainless Steel Pitot Tube 18-inch Insertion Length is designed specifically for flow measurement of dirty, particulate laden air or gas streams typical in smoke stack and other environmental testing. Total and static pressure tubes are precisely aligned and welded together every 6 inches for maximum accuracy, strength, and long term durability. The 160S-18PM Pitot tubes are designed to meet the need of the environmental testing field for an inexpensive, yet accurate and reliable way to measure the flow of particulate-laden air or gas streams. The 160S-18PM includes a 1in welded stainless steel sleeve and adjustable compression fitting with 1in MNPT mounting threads. These pitot tubes use large 5/16˝ diameter stainless steel tubing for both total and static pressures to avoid plugging. Versatile 1/8in female NPT connections enable use with any type of piping or tubing. Two barbed tubing adapters are included for use with 3/16in I.D. rubber or vinyl tubing. The 160S-18PM can be used in up to 1500°F (815.5°C) and 100 psig (6.89 bar).
Brand | Dwyer |
---|---|
Condition | NEW |
Vendor Alias | 160S-18PM |