Fluke Calibration 5622-10-M
Fast Response PRT Probe with Mini Banana Plugs, 1mm (0.04 in.), 6 ft. Lead
562210M
5622-10-M
Fluke Calibration 5622-10-M
Fast Response PRT Probe with Mini Banana Plugs, 1mm (0.04 in.), 6 ft. Lead
562210M
5622-10-M
- Brand Name: Fluke Calibration
- Condition: NEW
- Country of Origin: Japan
- Termination: Mini banana plugs
- Temperature range: -200 °C to 350 °C
- Nominal RTPW: 100 Ohm
- Temperature coefficient: 0.00385 Ohm/Ohm/°C nominal
- Uncalibrated DIN/IEC conformity: DIN/IEC Class A; ±0.15 °C at 0 °C
- Thermal EMF: 20 mV at 350 °C
- Cable: PVC, 4-wire cable, 2 meters long, 90 °C max temp
- Calibrated probe accuracy (includes calibration uncertainty and short-term stability): ±0.04 °C at -200 °C; ±0.04 °C at 0 °C; ±0.09 °C at 200 °C; ±0.09 °C at 300 °C
- Time constant (63.2 %) from 0 °C to 100 °C: 1.5 seconds
- Immersion depth: 20 mm (0.8 in.)
- Sheath 316 SST: 100 x 1.0 mm (4 x 0.04 in.)
- Designed for temperature measurements requiring fast response or short immersion over wide range
The Fluke Calibration 562210M Fast Response PRT Probe with Mini Banana Plugs, 1mm (0.04 in.), 6 ft. Lead features a stainless steel sheath. And because this high-quality wire-wound sensor comes in a small package, heat transfer to the sensors occurs quickly.
Immersion requirements for this probe are also a plus, with an immersion depth of 20 mm (0.8 in.). Getting into shallow or tight places is not a problem, either. And because this probe can handle temperatures from -200 °C to 350 °C, it is more versatile than most thermistors. Uncalibrated, this probe conforms to DIN/IEC Class A requirements with accuracy of ±0.15 °C at 0 °C.
Readout options for the Fluke Calibration 5622-10-M includes the 1523/1524 Handheld Thermometers, or the 1529 Benchtop Thermometer. Each of these readouts will read your PRT as a standard DIN/IEC probe or as an individually calibrated PRT.
| Country of Origin | Japan |
|---|---|
| Brand | Fluke Calibration |
| Condition | NEW |
