Fluke Calibration 9190A-D-P-156
Ultra-Cool Field Dry-Block Metrology Temperature Calibrator with Model 9190-INSD ("D" Insert) and Process Electronics
9190ADP156
9190A-D-P-156
4178920
Fluke Calibration 9190A-D-P-156
Ultra-Cool Field Dry-Block Metrology Temperature Calibrator with Model 9190-INSD ("D" Insert) and Process Electronics
9190ADP156
9190A-D-P-156
4178920
- Brand Name: Fluke Calibration
- UPC: 095969635622
- Condition: NEW
- Country of Origin: United States
9190A
- Temperature range: -95 °C to 140 °C
- Built-in reference thermometer readout accuracy: ± 0.05 °C full range
- Display accuracy: ± 0.2 °C full range
- Stability: ± 0.015 °C full range
- Cooling time: 23 °C to -90 °C: 80 minutes; 23 °C to -95 °C: 90 minutes; 140 °C to 23 °C: 60 minutes
- Portability: Weighs 16 kg (35 lb)
- Built-in front and back handles for easy two-handed carry
- Conforms to EURAMET cg-13 guidance on measurement practices for temperature block calibrators
- All controls and inputs on front panel
- Stability indicator shows whether block temperature is stable and within limits defined by the user PC interface
- USB and RS-232 support remote operation from computer
- Active heater zone control compensates for differential temperatures between zones
- Minimizes axial temperature gradients
- Define up to eight set-point temperatures; automatically ramp to and "soak" at each
- Specify soak time, number of cycles, and direction
- Fast time to temperature and small footprint
- Compact, efficient free piston Stirling cooler technology (FPSC)
9190-INSD
- Six metric comparison holes
- Hole quantities and sizes: 2 Holes, 3 mm.; 2 Holes, 4 mm.; 2 Holes, 6 mm
- Removable inserts sized for probes with named diameter
- Use additional inserts to broaden range of hole sizes available
- For use with Model 9190A
Process Electronics
- Reference sensor control:
- Set-point temperature control gets passed from internal sensor to external reference PRT
- 9190A controls well temperature based on its measurement and position inside well
- Helps minimize effects of axial gradient when reference PRT is aligned with short sensors
- 4-20 mA connectors:
- Power 4-20 mA transmitter from drywell
- Supplies 24 V dc loop power
- 4-wire PRT/RTD input:
- Reads 4-wire, 3-wire, or 2-wire PRT/RTD
- Accuracy ± 0.02 °C
- 4-20 mA circuit fuses
- Thermocouple input:
- Accepts common thermocouples with mini-jack termination
- Types: J, K, T, E, R, S, M, L, U, N, C
- Reference thermometer input:
- Smart connector input accepts -A terminated reference PRTs
- Accuracy ± 0.01 °C at -95 °C
The Fluke Calibration 9190ADP156 Ultra-Cool Field Dry-Block Metrology Temperature Calibrator with Model 9190-INSD ("D" Insert) and Process Electronics is the most accurate and stable, cold temperature dry-block on the market. It is ideal for applications that demand strict quality control and regulatory process compliance. These applications include on-location validation and calibration of RTDs, thermocouples, thermometers, and sensors used with process control equipment such as medical freezers, laboratory refrigerators, cold rooms, blood banks, sterilizers (autoclaves), and freeze dryers.
Great for Cleanroom Environments
Calibration baths are the most stable and uniform temperature sources available, but they aren't a good fit for cleanrooms. The size of a bath limits its portability; it uses fluids that produce fumes that can easily be spilled. The 9190A-D-P-156 is a great alternative. Its wide temperature range brackets the coldest and highest temperature ranges required for pharmaceutical, biomedical and food processing applications. The 9190A-D-P-156 is small and lightweight, making it easy to transport. There are no fluids so cleanrooms stay clean. And the 9190A-D-P-156 cooling and heating times are faster than a calibration bath, which means that calibration work gets done more quickly.
An Accurate Temperature Source is Critical for Dependable Process Measurements
Unreliable process measurements can have a damaging impact on business, leading to poor product quality, recalls, fines, waste, and lost profits. Ultimately, measurements are only as good as the temperature sources used to calibrate the measurement equipment.
The 9190A-D-P-156 incorporates the best technology and design expertise gained from decades of dryblock development experience. The 9190A-D-P-156 conforms to EURAMET cg-13, guidelines for best measurement practices for temperature block calibrators. As a result, the 9190A-D-P-156 specifications for accuracy, stability, axial (vertical) uniformity, radial (well-to-well) uniformity, loading, and hysteresis have been thoroughly and carefully defined and tested. With this Ultra-Cool Field Metrology Well, you can be confident you are using the most accurate and stable ultra-cool dry-block calibrator available. And that will have a positive impact on your business.
| Country of Origin | United States |
|---|---|
| Brand | Fluke Calibration |
| Catalog | 4178920 |
| Condition | NEW |
| UPC | 095969635622 |
| Vendor Alias | 9190A-D-P-156 |
- 1 - "D" Insert
- 1 - Power Cord
- 1 - USB Cable
- 1 - User Manual CD
- 1 - 9930 Interface-it Software
- 1 - Report of Calibration
- 1 - Well Insulator
- 1 - Insert Removal Tool
- 4 - Clamp Ferrites
- 1 - 6-PIN DIN Connector
- 1 - Test Lead Kit
