Instek APP-1001
LinkView Control Software for PSU/PSW/PSB Power Supplies and PEL Electronic Loads
Instek APP-1001
LinkView Control Software for PSU/PSW/PSB Power Supplies and PEL Electronic Loads
The Instek APP-1001 LinkView Control Software allows users to link directly to a PC and log data on charging and discharging tests. It allows users to operate a Power Supply and an Electronic Load as charge/discharge systems. Define charging and discharging procedures to automatically execute procedures so as to obtain measurement results.
- Support up to 12 channels
- Support up to 100 patterns (sequence)
- Export history graphs to Excel for further analysis
- Support up to 12 channels
- Support up to 100 patterns (sequence)
- Sequence steps: 1000 steps
- Minimum record period: 1s
- Maximum step time: 100 min
- Maximum repeat cycles: 65535 cycles
- Output with CSV file
- Long Term Power Monitoring of I, V, P(W)
- Create/define operation sequence for controlling Source/Load behavior
- Simultaneously run test sequence of each channel and data logging
- Data Analyzer:
- VIeW chart: support Zoom In/Tracking of Samples
- VIeW table: summaries testing result for VIeW and also each step including Voltage/Current/Power/VMax/Imax/PMax/AmpHour
- Live Data Monitoring:
- VIeW: Self-defined display range/offset adjustable
- Controllable displayed curve
- OS Compatibility:
- Windows 7+SP1 (32bit / 64bit)
- Windows 10 (32bit / 64bit)
- Interface Compatibility:
- GP-IB: GP-IB interface NI-488.2 driver by National Instruments is required
- RS-232C: Windows standard or USB-RS232C converter
- USB: USB-CDC of GW-Instek USB Driver
- For use with PSU/PSW/PSB 2000 Series Power Supplies and PEL 3000/3000E/2000A Series Electronic Loads
The Instek APP-1001 LinkView Control Software allows users to link directly to a PC and log data on charging and discharging tests. It allows users to operate a Power Supply and an Electronic Load as charge/discharge system for charging and discharging tests on batteries and super capacitors, etc. Users can define charging and discharging procedures to automatically execute procedures so as to obtain measurement results. History graphs are available and they can be exported to Excel for further analysis. The software is for use with the PSU/PSW/PSB Series Power Supplies and PEL 2000/2000A/3000/3000E Series Electronic Loads. One Channel in LINKVIEW consists of a pair of one channel of power supply and one channel of electronic load. Sequence pattern can be created for a maximum of 12 Channels. All of the power and electronic loads must use the same series.
Brand | Instek |
---|---|
Condition | NEW |
- 1 - LinkView Control Software (APP-1001)